Overview
The Curt Manufacturing Class I/II Ball Mount in black, part number CRT45518, is a 2 Inch drop ball mount with a 1.25 Inches X 1.25 Inches shank for class I and class II receivers.
The mount is built with a square receiver tube. It is rated for a 2,000 GTW (Gross Trailer Weight) and 200 LB. TW (tongue weight), and it has a gloss black powder coat finish.
Key features
- 2 Inch drop
- Square receiver tube construction
- 3/4 Inches ball hole
- Gloss black powder coat finish
- Steel material
Setting up a Class I/II mount
A Class I/II mount sits between a light-duty receiver and a trailer coupler, so the drop height and weight limits work together. Measure the coupler height on a level surface, then choose the drop that brings the trailer level when hitched. An incorrect drop can shift weight to the rear axle and affect steering and braking.
Check the receiver for rust or cracks before installing any mount, and make sure the pin and clip are seated fully. Keep the ball clean and greased to limit wear. When the mount is removed, store it dry, since moisture trapped in the square tube can speed corrosion around the welds.
- Measure coupler height before choosing the drop
- Keep loads within rated weights
- Store the mount dry when not in use
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT45518 |
| Drop | 2 Inch Drop |
| Shank size | 1.25 Inches X 1.25 Inches |
| Ball hole size | 3/4 Inches |
| Material | Steel |
| Finish | Gloss black powder coat |
| Gross trailer weight rating | 2,000 GTW |
| Tongue weight rating | 200 LB. TW |
Vehicle fitment
It is not tied to one vehicle. Match the 1.25 Inches X 1.25 Inches shank to your receiver and stay within the 2,000 GTW rating.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Check the 2 Inch drop against your trailer coupler height before towing, and keep loads within the 2,000 GTW and 200 LB. TW ratings.









