Control arms explained: fixed, adjustable or long arm, pinion angle and caster, flex joints, upper arms for IFS, greasing, and which arm suits your…
Flex joints, often called Johnny Joints or heim-style joints, are the articulating bushing replacements used in control arms, track bars and other suspension links. They allow more motion than rubber bushings and suit rock crawlers, trail builds and custom fabrication. This category includes forged and machined joints, rebuild kits and super-flex assemblies. Brands include Currie, Rubicon Express and TeraFlex. Check the product page for thread and ball sizes, then compare the products below.
Flex Joints
Showing 1–12 of 62 resultsSorted by popularity
-
Flex Joints
Rubicon Express Super-Flex Joint Rebuild Kit – RE3793
- Billet Super-Flex cartridge for the factory upper control arm mounts on Jeep XJ, MJ, ZJ, TJ and WJ chassis
- UHMW side races and a threaded adjuster nut
- Billet construction
- Rubicon says factory rubber bushings need replacing every race; this joint uses UHMW races instead
- Part number RE3793
SKU: R/ERE3793 -
-
-
Flex Joints
Rubicon Express Super-Flex Housing And Coupler – RM30205
- Rubicon Express RM30205 Super-Flex housing and 1.25-inch coupler assembly
- Welded and powder coated grey; left-hand thread
- Used in Rubicon lower control arms; Super-Flex joint sold separately
- Non-serviceable; UPC 614901447835
SKU: R/ERM30205 -
-
-
Flex Joints
Rubicon Express Heavy-Duty Super-Flex Joint Assembly – RE3794
- Rubicon Express RE3794 heavy-duty Super-Flex weld-on joint kit
- UHMW-PE races and extra thick threaded insert
- Machined end removes the snap ring and washer used on RE3791 and RE3792
- Up to 32 degrees of misalignment; UPC 614901440959
SKU: R/ERE3794 -
Flex Joints
Rubicon Express Super-Flex Coupler Assembly with 1 Inch Extension – RE3768
- Rubicon Express RE3768 Super-Flex coupler assembly, 1 inch longer than the RE3766
- Small housing with 1-inch threaded coupler, right-hand thread
- Welded, powder coated Rubicon grey, fully assembled
- UPC 614901440744
SKU: R/ERE3768 -
-
What a flex joint does
A rubber bushing twists and deflects to allow movement, which limits articulation and binds as the suspension flexes. A flex joint replaces that with a ball-and-socket arrangement threaded into the end of a link, such as a control arm or track bar. The ball rotates freely inside a housing, so the link can pivot through a wide range of angles with little binding. This is a key reason rock crawlers and custom suspension builders use them.
Common types
- Forged joints: typically a forged housing with a threaded stud, often available in different thread directions (right-hand and left-hand) for adjustable links.
- Machined joints: machined from bar stock, sometimes designed to fit into a specific housing casting.
- Narrow versions: a shorter profile for tight spaces.
- Super-flex assemblies: multi-piece joints that provide extra misalignment for demanding applications.
- Rebuild kits and races: replacement balls, races and hardware for worn joints.
Specs that matter
Several dimensions must match your application. Thread size and direction decide whether the joint fits the link end, and mixing right-hand and left-hand threads is how adjustable links are built. The housing diameter, width and ball size determine the fit in the link and the mounting bolt. Material, finish and sealing influence durability, because dirt and water are the main enemies of an open joint. Check the bolt size and sleeve or spacer requirements, and compare the stated misalignment angle if listed.
Trade-offs to understand
- Flex joints can transmit more noise and vibration than rubber bushings, so they are mostly used in vehicles that prioritize articulation over refinement.
- They typically need periodic inspection, cleaning and sometimes lubrication, depending on the design.
- Dirt ingress shortens their life, so protective boots or shields are often worth using.
- They are a poor choice for a daily commuter if comfort is the priority.
Installation and fitment notes
Suspension links and steering-adjacent parts are safety critical. Use proper thread engagement, jam nuts and Grade 8 or specified hardware, and torque to the manufacturer's specifications. Have the finished work and alignment checked by a qualified shop if you change link length. Verify the thread, size and orientation against your existing links. Because many of these are universal components used in fabrication, confirm that the part is suitable for the application and read the manufacturer's specifications before choosing.
Where flex joints are used
The most common locations are control arms, track bars, radius arms and long-travel links on rigs built for rock crawling and articulation. They are also popular in custom fabrication, where builders create their own links and need a threaded end that can be adjusted. In these cases, the joint is paired with a threaded tube or bung and locked with a jam nut.
Before choosing, plan the geometry. Flex joints allow motion, but they do not stop a link from binding if the length or angle is wrong. Keep the links parallel where the design requires it, and give the joint room to rotate without hitting the housing. Check them for play at every service, and clean out dirt, since grit inside the joint speeds up wear and causes slop that you can feel as vague steering or clunking.
Related guides
- Control Arms Explained: Fixed, Adjustable or Long Arm
Popular Flex Joints brands
- Currie (42)
- Rubicon Express (18)
- TeraFlex (1)
- California Super Trucks (1)
- Tomken Machine (1)
- Trail Gear (1)
Flex Joints FAQ
What is a Johnny Joint?
A Johnny Joint is a brand name for a type of flex joint, a threaded joint with a rotating ball inside a housing. It is used in place of a rubber bushing in control arms and links to allow greater articulation.
Do flex joints need maintenance?
Most need periodic inspection and cleaning, and some designs call for lubrication. Dirt and water shorten their life, so check for play, wear and corrosion. Rebuild kits can restore a worn joint if the housing is still sound.
Why are there left-hand thread flex joints?
Left-hand and right-hand threads let you build an adjustable link. Turning the link body changes the length without removing either joint. Make sure you buy the thread direction that matches your link design.
Are flex joints street legal or comfortable?
They are generally usable on the street, but they transmit more noise and vibration than rubber bushings. Whether a modification is allowed depends on your local rules, so check the regulations where you live.




