Overview
The RM10220 is a heavy-duty Super-Flex hi-misalignment sleeve for builders. It is a universal fit.
A sleeve like this sits inside a Super-Flex joint to allow greater misalignment. Confirm the joint size it is made for before ordering.
Sleeve fit and joint wear
A Super-Flex joint uses a sleeve to allow the shaft to angle more than a standard joint, so the sleeve carries the load during operation. Fit and surface condition matter because the sleeve must move freely inside the joint without binding or excessive play.
Inspect the joint at regular intervals for grease loss, looseness and wear marks on the sleeve. When a joint is rebuilt, replace worn parts together rather than one at a time. Keep the joint lubricated and check the driveline angles after any lift or axle change, since large angles can overload the sleeve.
- Check for grease leakage at the seals
- Look for play or clunking under load
- Inspect the sleeve surface for scoring
- Replace worn joint parts together
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RM10220 |
| UPC | 614901444780 |
| Type | Super-Flex hi-misalignment sleeve |
| Duty | Heavy duty |
| Use | Builder part |
| Fitment | Universal fit |
Vehicle fitment
The sleeve is universal fit and no vehicle is named. Match it to the Super-Flex joint it is used in.
Confirm the joint size before ordering.


