Overview
The Currie CE-9113L-26 is a forged, high-angle Johnny Joint for custom suspension builds. It is designed to avoid transmitting road noise and clunk, and it can be serviced in the field.
Key features
- Forged, high-angle Johnny Joint
- Designed to avoid transmitting road noise and clunk
- Field serviceable and rebuildable
- Universal-fit joint for custom suspension
Installing a suspension joint
Installing a Johnny Joint starts with clean mounting faces. Remove old grease, rust and debris from the arm and the joint seat so the joint sits square and turns freely. Dry or binding joints usually come from contamination or a misaligned seat rather than the joint itself, so inspect those surfaces first.
Once the joint is in place, cycle the suspension through its full travel by hand before driving. Look for binding, rubbing on the arm or any contact with brackets. A joint that is only partly seated can work loose on the trail, so recheck the fasteners or welds after the first few outings.
- Clean the mounting faces before fitting
- Cycle the suspension through full travel by hand
- Recheck fasteners or welds after early trail use
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9113L-26 |
| UPC | 817783003643 |
| Construction | Forged |
| Joint type | High-angle Johnny Joint |
Vehicle fitment
Currie gives universal fit and names no year, make or model. As a suspension component it still needs the mounting points and joint geometry of your own control arm to match, so confirm that yourself.
Confirm your vehicle’s year, model and trim before ordering.









