Overview
The TeraFlex 4115102 is a trackbar flex end with a right-hand thread, a 7/8 inch by 18 TPI shank and a 10mm bolt hole, designed as a direct-fit replacement end for trackbars on the Jeep Wrangler. It fits the 2004–2006 Jeep Wrangler LJ and 1997–2006 Jeep Wrangler TJ in the trims covered below.
The flex end uses a urethane bushing that allows some misalignment while articulating. The bushing restricts excess movement, so the trackbar keeps control and handling at highway speeds. It is a finished, serviceable forged joint.
Key features
- Urethane bushing allows misalignment when articulating
- Restricts excess movement for control at highway speeds
- Right-hand thread
- 7/8 inch by 18 TPI shank
- Accepts a 10mm bolt
- Forged, finished and serviceable joint
Trackbar geometry basics
A trackbar holds the axle centered side to side, so the flex end at the frame or axle is where the bar’s movement is absorbed. A worn end lets the axle shift under load, which can change steering feel and make the vehicle wander on the highway.
When replacing a flex end, keep the trackbar length and mount geometry in mind. Confirm that the new end threads in the same direction and that the bolt clamps the mount firmly. Use the bushing as the limit for movement rather than relying on the bolt to take the strain.
Inspect the joint at every tire rotation and after rough trail days. Look for play, a torn or cracked bushing and thread damage, and check that the trackbar still sits square once the new end is installed.
- Check thread direction before installing
- Confirm the bolt seats in the mount
- Inspect the bushing after rough trail use
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4115102 |
| UPC | 843885025665 |
| Joint details | Finished joint |
| Type | Forged |
| Maintenance | Serviceable |
| Thread direction | Right |
| Shank | 7/8 inch x 18 TPI |
| Bolt | 10mm |
| Shoulder width | 1.6 inch |
| Fitment field | Direct fit |
Vehicle fitment
It fits the following Jeep Wrangler models:
- 2004–2006 Jeep Wrangler (LJ), Unlimited and Unlimited Rubicon
- 1997–2006 Jeep Wrangler (TJ), 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X
It does not fit the JK, JL or other Wrangler generations, or years outside 1997 to 2006. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The thread is right-hand, so confirm it matches the trackbar end before threading the flex end on. Check that the 10mm bolt fits the mount and that the urethane bushing is seated before the trackbar is loaded.
What’s included
The TeraFlex 4115102 trackbar flex end with the 7/8 inch shank and urethane bushing described above.
Not included: The 10mm bolt is not included.







