Overview
The Currie CE-9112RK is a Johnny Joint Rebuild Kit for servicing a Johnny Joint, a flex joint used in off-road axle and suspension linkage. Its listed size is 2 in., and fitment is universal, so the kit is not tied to a specific make, model or year.
Rebuilding a Johnny joint
A rebuild replaces the worn parts inside a Johnny joint rather than the entire linkage assembly. Before taking the joint apart, clean out grit and old grease, and note how the parts are oriented so reassembly lines up with the original. Look at the housing bore and stud for scoring, because a worn bore can wear new parts quickly.
Rebuilding works best when the housing and stud are still in good shape. If the bore is oversized or the stud is pitted, a new housing or rod end may be the better choice. Use new seals and boots with any rebuild, and check free movement by hand before the joint goes back on the vehicle.
- Clean the housing and stud before disassembly
- Check the bore for scoring or oversize wear
- Tighten fasteners with a torque wrench rather than by feel
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9112RK |
| UPC | 70000639770 |
| Size | 2 in. |
Vehicle fitment
Fitment is universal, so this kit is not matched to a specific vehicle. Measure your existing joint and confirm clearance for your build.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.









