Overview
The Rubicon Express RE3766 is a Super-Flex coupler assembly with a small housing and a 1-inch threaded coupler. It is used in Rubicon track bars and upper control arms.
The assembly is welded, powder coated Rubicon grey and fully assembled, so it is ready for installation as sold. It has a right-hand thread and is universal fit, with a serviceable DOM joint.
Key features
- Small Super-Flex housing
- 1-inch threaded coupler
- Right-hand thread direction
- Finished joint assembly
- Serviceable DOM joint
Fitting and joint wear
Track bars and upper control arms take axle movement through a coupler, which is why joint condition has a direct effect on steering and alignment. A tight, correctly threaded coupler keeps the link true to its mounting points, while a worn joint allows the axle to shift under load. Before fitting, look at the bar or arm for bent sections, cracked welds and worn bushings, since a new joint on a damaged link will not hold alignment for long.
Thread engagement also matters. Clean the threads, use the jam nut as the build calls for and check that the coupler is square to the bar once tightened. Road debris and water can get into a joint over time, so inspect the boot or seal at regular service intervals.
- Inspect the track bar for bends before fitting
- Clean threads and check the jam nut is fully engaged
- Look for dry or stiff movement at the ball
- Recheck alignment after the first trail run
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3766 |
| UPC | 614901440713 |
| Housing | Small Super-Flex |
| Coupler | 1-inch threaded |
| Thread direction | Right |
| Joint details | Finished joint |
| Maintenance | Serviceable |
| Type | DOM |
| Finish | Powder coated Rubicon grey |
Vehicle fitment
It is a universal fit part, so no specific vehicle applies. Match the 1-inch threaded coupler and the right-hand thread to the track bar or control arm you are using.
Confirm the thread direction and coupler size against your existing parts before ordering.


