Overview
The Rubicon Express RE3793 is a billet Super-Flex joint rebuild kit that fits the factory front or rear upper control arm mounting points on Jeep XJ, MJ, ZJ, TJ and WJ chassis.
The cartridge uses UHMW side races and a threaded adjuster nut that allows tightening and rebuilding if necessary. It is an alternative to factory rubber bushings in the upper control arm mounts.
Key features
- Billet construction
- UHMW side races
- Threaded adjuster nut for tightening
- Designed for the factory front or rear upper control arm mounting points
- Covers the XJ, MJ, ZJ, TJ and WJ chassis
Upper arm joint wear
Upper control arm joints carry steering and suspension loads while allowing the axle to articulate. When a joint wears, the first signs are usually a clunk over bumps, play in the steering or a shimmy at speed. Because the joint sits at a mounting point, check the mounts and the arm for cracks or bent tubes when the joint is replaced.
Choosing a replacement joint involves matching the mount style to the chassis and considering the material. Billet cartridges with UHMW races are a different design from factory rubber bushings, so the installation and maintenance routine differs as well. Before installation, clean the mounting bore, inspect the cartridge for damage and tighten the adjuster to the kit instructions. Keep a schedule for inspection after rough trail days.
- Look for play at the joint during a bounce test
- Inspect the mounting bore for corrosion
- Check the upper arm for bent or cracked tube
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3793 |
| Type | Super-Flex joint rebuild kit, billet cartridge |
| Side races | UHMW |
| Adjuster | Threaded adjuster nut |
| Maintenance | Follow the kit instructions for tightening and rebuilding. |
| Mounting point | Factory front or rear upper control arm mounts |
Vehicle fitment
The kit fits the factory front or rear upper control arm mounting points on XJ (Cherokee, 1984-2001), MJ (Comanche, 1986-1992), ZJ (Grand Cherokee, 1993-1998), TJ (Wrangler, 1997-2006) and WJ (Grand Cherokee, 1999-2004) chassis.
Confirm fit for your vehicle’s year, model and trim before ordering, including YJ and JK Wrangler applications.
Installation notes
The joint installs into the factory upper control arm mounting points, and the threaded adjuster nut sets the tightness. Follow the instructions that come with the kit for any rebuilding.
What’s included
The billet Super-Flex cartridge kit with UHMW side races and threaded adjuster nut. Check the package contents against your installation before starting.
