Select your vehicle

Narrow 2″ Johnny Joint Bushing

Currie

Shop Currie Flex Joints on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Replacement one-piece urethane bushing for Currie 2 inch narrow style Johnny Joint rod ends
  • Currie part number ES-9385, UPC 700008182751
  • Universal fit; match it to a 2 inch narrow rod end
  • Diameter 1-5/8 inch

Description

Overview

The Currie ES-9385 is a replacement one-piece urethane bushing for rebuilding Currie 2 inch narrow style Johnny Joint forged and weld-on rod ends. The bushing is the wear part inside the joint, so replacing it restores the rod end without buying a new one. It measures 1-5/8 inch in diameter.

It is universal fit, so compatibility depends on the rod end rather than on a vehicle. The rod end must be a 2 inch narrow style Johnny Joint forged or weld-on rod end.

Key features

  • One-piece urethane bushing for rebuilding 2 inch narrow style rod ends
  • Made for Currie forged and weld-on Johnny Joint rod ends
  • 1-5/8 inch diameter
  • Non-serviceable, so a worn bushing is replaced rather than repaired.

Rod end wear and replacement

A rod end lets a link pivot in several directions, so the bushing inside it takes constant rotation, grit and moisture. As the bushing wears, play grows and the joint can knock or feel loose over rough ground. Inspect the rod end for movement and cracking when you check the rest of the suspension.

When you replace a bushing, pay attention to the rest of the joint. Clean the rod end bore thoroughly, look for scoring on the ball, and make sure the ball still moves smoothly before reassembly. Worn ends are often replaced alongside bushings to avoid repeat work on the trail.

  • Look for play when the joint is loaded
  • Clean the bore before pressing in a new bushing
  • Check the ball for scoring or pitting

Specifications

Brand Currie
Part number ES-9385
UPC 700008182751
Material Urethane
Piece count 1
Diameter 1-5/8 inch
Rod end size 2 inch narrow style
Maintenance Non-serviceable

Vehicle fitment

It is universal fit and is a replacement part for a rod end rather than a vehicle-specific component. No year, make or model applies.

The bushing is not sized for a vehicle. Check that your rod end is the 2 inch narrow style before ordering. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One replacement urethane bushing.

Not included: Rod end and other rebuild hardware are needed separately for a complete rebuild.

SKU: CURES-9385 Category:

Specification

Shipping weight 0.25 lbs
Package dimensions 4.00 × 4.00 × 4.00 in
brands

Questions & Answers

What is the Currie ES-9385?

The Currie ES-9385 is a replacement one-piece urethane bushing for rebuilding Currie 2 inch narrow style Johnny Joint forged and weld-on rod ends. It measures 1-5/8 inch in diameter and comes as one piece.

Does this bushing fit a specific vehicle?

No vehicle applies. It is universal fit, so compatibility depends on the rod end rather than a year, make or model. Check that your rod end is the 2 inch narrow style before ordering.

What size is the bushing?

The bushing measures 1-5/8 inch in diameter. Measure your rod end bore before ordering to confirm the bushing suits it, since no other dimensions are known.

Can a worn bushing be rebuilt?

No. A worn one is replaced rather than repaired, because the bushing is non-serviceable. Replace it as a complete piece when rebuilding the rod end.

How can I tell a rod end bushing is worn?

Look for looseness or knocking at the joint, especially when the suspension cycles. Grab the link and check for free movement, then inspect the bushing for cracks or flattened areas. Replace the bushing when play returns after cleaning.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Currie Flex Joints on Amazon