Tube Fenders
Showing 13–24 of 102 resultsSorted by popularity
-
Tube Fenders
Fab Fours Rear Grumper Fender (Black) – JL1001-1
- Rear Grumper fender for the 2018–2026 Jeep Wrangler JL
- Fab Fours part number FFIJL1001-1, black, sold as a pair
- Width and coverage of 7 inches
- Matches the Fab Fours front Grumper Fender (JL4600)
- Fits 2-door and 4-door JL models, including Unlimited Moab
SKU: FFIJL1001-1 -
-
Tube Fenders
Fab Fours Base Rear Fenders (Black) – JL2001-1
- Base rear replacement fender for the 2018–2026 Jeep Wrangler JL
- Fab Fours part number FFIJL2001-1, black finish
- Removable 16 gauge laser cut skin for customization
- Fits 2-door and 4-door JL models across many trims
- Optional flares named by Fab Fours are not included
SKU: FFIJL2001-1 -
Tube Fenders
DV8 Offroad Flat Slim Fenders (Black) – FDGL-01
- DV8 Offroad FDGL-01 flat slim fenders in black for the 2020–2026 Jeep Gladiator JT
- Sold as a set of 4, front and rear positions
- Turn signal light that can integrate into the factory harness
- Bolts on with no drilling required
SKU: DV8FDGL-01 -
-
Tube Fenders
DV8 Offroad Armor Fenders with LED Turn Signal Lights – FDJL-01
- DV8 Offroad FDJL-01 Armor Fenders for the 2018–2021 Jeep Wrangler JL, front and rear positions
- Integrated LED turn signal light that can integrate into the factory harness
- Bolts on with no drilling required
- Built for maximum clearance on narrow passages
SKU: DV8FDJL-01 -
-
-
Tube Fenders
Addictive Desert Designs Stealth Fighter Front Fenders (Black) – D96164201NA
- Addictive Desert Designs D96164201NA Stealth Fighter front fenders in black
- Quantity: pair
- Fits 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator
- Two rock light mounts on each side
- Made in America from .120-inch wall tubing and plate steel
SKU: ADSD96164201NA -
Tube Fenders
Addictive Desert Designs Stealth Fighter Front Fenders – D96164203NA
- Addictive Desert Designs D96164203NA Stealth Fighter front tube fenders
- Black powdercoat finish, made in America
- Fits 2020–2026 Jeep Gladiator and 2018–2026 Wrangler JL
- Mounting points for two rock lights per side
- No cutting or drilling required
SKU: ADSD96164203NA -
Tube Fenders
Warrior Rear Corners with Cutouts for LED Lights (Black) – 924APC
- Warrior rear corners, part 924APC, for 2007–2016 Jeep Wrangler (JK)
- Pre-cut openings for a 4 in red stop, turn and tail light and a 2 in white reverse light
- Cutout for the gas tank filler
- Aluminum diamond plate with black powder coat
- Sold in pairs; cutting or drilling required
SKU: W/I924APC -
Tube Fenders
Smittybilt XRC Front Armor Skins (Tan) – 76980TAN
- Front XRC Armor flat skins for 2007 to 2018 Jeep Wrangler JK
- Cold rolled steel with a two-stage textured tan powder coat
- Contours to the OE panels and bolts on with the stock fenders
- All mounting hardware included; sold as a pair
- Drilling required; 5 year limited powder coat warranty
SKU: S/B76980TAN
Why use tube fenders
Stock plastic and sheet metal fenders are a weak point on a vehicle that goes off-road with larger tires. They crush against rocks, crack when brushed by trees, and limit the room for wheels to move at full flex. Tube and aluminum fenders replace them with narrower, stronger, or more open designs that offer better tire clearance and a better approach and departure profile. Many owners also like the weight savings of aluminum.
Types of fender parts
- Tube fenders: tubular frames that replace the whole fender and allow a wide opening around the tire.
- Inner fenders: aluminum panels that replace the factory inner fender, often with vents for engine bay airflow and a cleaner way to route wiring.
- Flares and armor: steel or aluminum flares that attach to the body edge with a wider, more rugged look.
- Front and rear sets: separately listed for the front corners and the rear quarter panels, sometimes specific to two-door or four-door models.
Materials and finishes
Aluminum is light and does not rust, though it can dent or tear on hard impacts and is sold bare or with a finish. Steel is stronger and cheaper to repair by welding, but heavier and requires paint or powder coat to prevent corrosion. Thicker plate, such as 3/16 inch steel, adds strength where the part may be hit. Bare metal needs sealing if the vehicle sees salt or coastal air, and anodized or powder-coated finishes last longer in harsh conditions.
What to check before buying
Vehicle fitment is the key detail. Listings often specify a Wrangler generation, number of doors, and whether the part is front or rear, left or right. Check whether the part pairs with other products from the same maker, such as a matching flare. Some kits install with bolts alone, while others need minor drilling or trimming of the factory fender and brackets, and a few need welding. Compare coverage, too, because narrower fenders may not satisfy the rules in your state for covering the tires on the road.
Installation and legal notes
Take your time with test fits and mark any cuts carefully. Seal exposed edges and check that the new fender doesn't interfere with the hood, lights, or steering at full lock. Lighting and turn signals may need relocation. Fender coverage rules vary by state, so check local regulations before using these on public roads. Always confirm fitment for your exact year, make, and model with the manufacturer's specifications.
Maintenance and compatibility
After each trail season, check welds, mounting bolts, and any slotted holes for cracks or loosening, especially near the corners that take the most hits. On bare aluminum, wash off salt and mud, and look for pitting at fasteners where dissimilar metals meet, since steel bolts in aluminum can corrode. Use stainless hardware or anti-seize compound where recommended. Think about the other parts of the vehicle, too. Larger tires, a winch bumper, and body armor can all change which fender style fits well. Keep wiring for turn signals and side markers away from sharp tube edges, and use grommets where cables pass through the panel to prevent chafing.
Popular Tube Fenders brands
- Poison Spyder Customs (71)
- Smittybilt (8)
- Fab Fours (5)
- Rugged Ridge (5)
- Addictive Desert Designs (3)
- Fabtech (3)
- DV8 Offroad (3)
- Fishbone Offroad (3)
- Pro Comp Suspension (2)
- Blue Torch Fabworks (1)
- Aries Offroad (1)
- GenRight (1)
Tube Fenders FAQ
What is the difference between tube fenders and fender flares?
Flares attach to the existing body panel and extend its edge. Tube fenders replace the fender itself with a stripped-down, tubular or aluminum design that opens up tire clearance and drops weight.
Are aluminum tube fenders better than steel?
They suit different needs. Aluminum is lighter and does not rust but can dent or tear. Steel is stronger and easier to weld but heavier and needs paint. Consider your terrain, budget, and corrosion exposure.
Do tube fenders require cutting or drilling?
Some kits bolt on with minimal drilling, and others need trimming of the factory fender or brackets. Check the product page notes and instructions to see what installation involves for your vehicle.
Are tube fenders street legal?
It depends on your state. Many places require bodywork to cover the tire tread on the road, and open tube designs may not meet that. Check local regulations and consider this before choosing a style.











