Overview
The Poison Spyder 14-05-075 is a rear DeFender flare, 5 inch wide, finished in bare steel. It is weld-on and is designed to match Poison Spyder’s front DeFenders.
The flare can be added to an existing set of Crusher Corners or to a competitor’s full corner armor. It is fabricated entirely from 3/16 inch plate, with a sturdy outer edge and a full under-side return for strength.
Welding is required, so the flare must be welded in place. It is built as a tubeless design rather than on the thinner outer rail tubing found in traditional tube fenders and flares.
Key features
- 5 inch wide rear flare
- Bare steel finish
- Weld-on design
- Fabricated entirely from 3/16 inch plate
- Full under-side return on the outer edge
Welding a flare in place
A weld-on flare depends on clean, sound welds more than on any bolt pattern. Remove paint, rust and mill scale from the weld zone before fitting, and bare steel will take a cleaner bead. Dry-fit the flare and check the gap to the corner or body all the way around before tacking anything.
Work in short passes and let the metal cool between them, which limits heat distortion in the 3/16 inch plate. Tack the flare at several points first, then fill the seams in an order that keeps the part square. Grind down any sharp weld spatter so it does not catch rocks or cut into the trail gear.
- Clean paint and rust from the weld zone
- Dry-fit and check alignment before tacking
- Weld in short passes to limit heat distortion
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-05-075 |
| UPC | 614901736229 |
| Position | Rear |
| Flare width | 5 inch |
| Material | 3/16 inch plate steel |
| Finish | Bare steel |
| Installation | Welding required |
Vehicle fitment
It fits the CJ5 from 1976 to 1983, the CJ7 from 1976 to 1986, the Wrangler LJ from 2004 to 2006, the Wrangler TJ from 1997 to 2006 and the Wrangler YJ from 1987 to 1995, across the trim lines for each model.
The list covers several generations, so confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required, so the flare should be fitted by someone equipped to weld the 3/16 inch plate to the corner or body. Check the placement before welding.
What’s included
One rear DeFender flare in bare steel.









