Overview
The Poison Spyder 14-02-040 is a DeFender XC front flare in bare steel for the 1997–2006 Jeep Wrangler (TJ), in the Rubicon, SE, Sahara, Sport, X and 65th Anniversary Edition models, and for the 2004–2006 Jeep Wrangler Unlimited (LJ), including the Unlimited Rubicon. The XC line is designed for extreme tire clearance without a tall lift.
The wheel opening sits 3 inches higher than on standard DeFenders, which increases clearance. In most cases a Jeep can run 37-inch tires with no suspension lift, and 40-inch tires with a couple of inches of lift. The XC keeps a low center of gravity (LCOG) while adding that clearance.
Like the standard DeFenders, the XC is built from CNC laser cut, brake-formed 3/16-inch plate steel. The back of the wheel opening sits about 2-1/2 inches further back compared with typical tube fenders and about 4 inches further back than the stock Jeep flares.
The 3-inch tapered flare was designed to give splash protection like the regular 3-inch flare. Instead of a straight side, the edge tapers inward toward the front of the Jeep, parallel to the hood. It runs from 3 inches at the back to about the width of Poison Spyder’s Zero Flare at the front. That gives the same clearance for articulating tires and tight trails that the Zero Flare provides.
Installation is more involved than a bolt-on. The fender requires modification to the factory hood, and Poison Spyder’s DeFender XC inner fenders (part PSC14-02-099) are needed to complete the installation. A mounting location is provided for a 3/4-inch LED marker.
Key features
- Extreme clearance with a wheel opening 3 inches higher than standard DeFenders
- 3-inch tapered flare that tapers inward toward the front
- Built from CNC laser cut, brake-formed 3/16-inch plate steel
- Splash protection like the regular 3-inch flare
- Mounting location for a 3/4-inch LED marker
- Bare steel, shipped unpainted
Lift and tire size
Tire clearance on a Jeep depends on the fender, the wheel opening position and the lift height working together. A higher wheel opening gives the tire more room to travel without the body needing a tall lift. Measure your planned tire width and height against the fender edge before committing to a size.
Installation involves more than the fender itself. The hood and inner fender work matter for a clean fit, and marker placement should be set before drilling. Plan the full package together so that the flare, inner fenders and any lift are chosen as one setup.
- Measure the tire you plan to run against the fender
- Plan inner fenders and hood work together
- Set marker placement before drilling
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-02-040 |
| Location | Front |
| Type | Tube fender |
| Material | 3/16-inch plate steel |
| Flare | 3-inch tapered |
| Marker mount | 3/4-inch LED marker |
| Finish | Bare steel |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
Poison Spyder lists these DeFender XC front flares as a direct fit for the 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and for the 1997–2006 Jeep Wrangler (TJ) in its listed trims.
The list does not cover the 1987–1995 YJ, the 2007–2018 JK or the 2018–2022 JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling and a modification to the factory hood. The DeFender XC inner fenders (PSC14-02-099) are needed to complete the fit.
What’s included
One bare steel DeFender XC front flare with its 3-inch tapered flare and marker mounting location.
Not included: the DeFender XC inner fenders, the hood modification, the 3/4-inch LED marker and any paint or powder coating.


















