Drivetrain & Differential
Showing 973–984 of 1036 resultsSorted by popularity
-
-
Differential Covers
G2 Ford 8.8 Inch Aluminum Cover Black W Load Bolts – 40-2013-1ALB
- Black rear cover for Ford 8.8 inch axles, part number 40-2013-1ALB
- Magnetic drain plug and dipstick to isolate debris from moving parts
- Bearing cap support bolts for added strength
- Black powder coat finish with increased fluid capacity
- Also named for Mazda 8.8 inch axles
SKU: G/240-2013-1ALB -
Transfer Case Crossmember
Trail Gear Crossmember Kit – 120004-1-KIT
- Trail Gear crossmember kit, part number 120004-1-KIT
- Precision laser cut steel crossmember with slotted mounting holes
- Made from 3/8 inch thick plate steel with tapered bolts included
- Built for dual transfer case setups in Toyota Pickup and 4Runner models
SKU: TGI120004-1-KIT -
Differential Covers
G2 GM 10.5 Inch 14 Bolt Aluminum Cover – 40-2023AL
- Cast aluminum cover for GM 10.5 inch 14 bolt rear axles
- Reinforcing ribs; heat treated and shot peened for direct impacts
- Designed to dissipate heat and help cool the gear oil
- Part number 40-2023AL, raw aluminum finish
SKU: G/240-2023AL -
Differential Covers
G2 Ford 10.25 Inch/10.5 Inch Aluminum Cover – 40-2046AL
- Rear differential cover for Ford 10.25 inch and 10.5 inch Sterling axles, part number 40-2046AL
- Lightweight cast aluminum body with ribbing
- Heat treated and shot peened casting
- Raw natural aluminum finish
- Listed with extra oil capacity
SKU: G/240-2046AL -
-
-
Axle Upgrade Kits
Trail Gear Samurai Front Axle Service Kit – 141003-3-KIT
- Trail Gear Samurai front axle service kit, part 141003-3-KIT
- One kit covers both left and right front axle sides
- Includes seals, wheel bearings, knuckle bearings and backing plates
- Fits 1986-1995 Samurai models
SKU: TGI141003-3-KIT -
-
What belongs in the drivetrain
The drivetrain moves power from the crankshaft to the ground. On a typical 4x4 that means the clutch or torque converter, the transmission, the transfer case, front and rear driveshafts, and the axle assemblies with their differentials, gears, bearings and seals. The subcategories here separate those systems so you can narrow down to complete axles and third members, performance axle components, OEM-style replacement axle parts, drive shafts, shifters or transfer case upgrades.
Identify the axle before you shop
Most axle parts are specific to the axle model, spline count and sometimes the production year. Product titles in this category refer to Dana 30, Dana 35, Dana 44, Dana 80 and AMC Model 20 housings, among others. Read the data tag on the differential housing or pull the cover and count ring gear bolts and measure the ring gear diameter. A part labeled for a Dana 44 front axle will not necessarily fit a Dana 44 rear axle, so note the axle location as well as the model.
Gear ratio and differential type
- Ring and pinion ratio: a numerically higher ratio such as 4.56 or 5.38 multiplies torque more and helps larger tires turn freely, at the cost of higher engine speed on the highway.
- Matched sets: ring and pinion gears are lapped and used as a pair, and front and rear ratios must match on a four-wheel-drive vehicle.
- Open, limited-slip and locking differentials: each handles traction differently, and clutch-type limited-slip units use clutch packs and friction additives that wear over time.
Installation and setup
Gear installation depends on correct pinion depth, backlash and bearing preload. These adjustments need dial indicators, marking compound and patience, and a mistake can destroy a new gear set within a few miles. Many owners hand this work to a driveline shop. Replace crush sleeves, seals and gaskets whenever the assembly is opened, and use the gear oil grade and capacity the axle manufacturer specifies. Torque fasteners to published values.
Confirming compatibility
Always confirm fitment for your exact year, make and model, and compare the part number against the manufacturer's specifications. Spline count, axle shaft diameter, bolt pattern and housing casting numbers all matter, and cross-referencing them avoids returning the wrong part after a weekend teardown.
Maintenance habits matter as much as the parts you choose. Check axle breather tubes so they are not clogged or collapsed, since a blocked breather builds pressure and pushes oil past the seals. Inspect universal joints and slip yokes for play, grease them if they have fittings, and look at the driveshaft angles after any lift or suspension change. Vibration at a particular speed often points to a driveshaft that is out of balance or running at too steep an angle. Gear oil that looks milky has taken on water, and metallic glitter on a magnetic drain plug is a sign that something inside deserves a closer look before it fails on the trail. Keep a record of the ratio, axle model and spline count for each axle so future orders are straightforward.
When budgeting a drivetrain project, remember the supporting parts. Bearings, seals, shims, carrier hardware and fluids are all needed alongside gears, and skipping them to save a little money tends to cost more later. If you are unsure which items belong together, a driveline specialist can review your list.
Popular Drivetrain & Differential brands
- G2 Axle and Gear (320)
- Dana Spicer (127)
- Crown Automotive (115)
- Omix-Ada (63)
- Moog (59)
- Centerforce (44)
- Trail Gear (39)
- ARB 4x4 Accessories (33)
- Alloy USA (26)
- Jeep (21)
- Eaton (16)
- TeraFlex (15)
Shop Drivetrain & Differential by type
- Performance Axle Components (669)
- Drive Shafts & Drive Shaft Components (78)
- OEM Replacement Axle Parts (93)
- Complete Axles & Third Members (32)
- Clutch & Bellhousing Components (98)
- Automatic Transmissions (26)
- Shifters & Shifter Components (13)
- Transfer Cases and Replacement Parts (12)
- Transfer Case Upgrades & Crawl Boxes (7)
- Manual Transmissions Parts (5)
- Transmission and Transfer Case Mounts (6)
Drivetrain & Differential FAQ
How do I know which Dana axle I have?
Check the axle tag or stamped casting numbers on the housing, count the differential cover bolts, and look at the cover shape. Measuring the ring gear diameter after removing the cover gives a definitive answer. Confirm against the manufacturer's specifications for your year and model.
Do I need to change both axle gear ratios at once?
On a part-time or full-time four-wheel-drive vehicle, yes. Front and rear ratios must match, because mismatched ratios make the axles fight each other and can damage the transfer case and gears. Regear both axles together with the same ratio.
Is a ring and pinion set something I can install at home?
It is possible, but setting pinion depth, backlash and bearing preload takes special tools and experience. Errors cause noise and rapid wear. Many owners use a driveline shop, especially for the first gear swap.
What fluids should I replace when I work on the drivetrain?
Replace gear oil in any axle you open, plus transmission and transfer case fluid if they are involved. Use the viscosity and friction modifier requirements specified for your axle, and replace seals and gaskets while the parts are apart.











