Overview
This Dana Spicer 1310 series universal joint has an outside snap ring (OSR) retention style. Its outside snap ring dimension is 3.219 and its cap diameter is 1.062, the measurements to match against the joint being replaced.
It is sold as Universal Fit. Confirm the 1310 series and both dimensions against your current joint before installing it.
Key features
- 1310 series construction
- Outside snap ring (OSR) retention style
- Outside snap ring dimension of 3.219
- Cap diameter of 1.062
Measuring before you swap
A universal joint transfers driveshaft torque through a cross and four bearing cups. Measuring the existing joint before buying gives you a reliable reference, because series, snap ring style and cap diameter all decide whether the cups seat in the yokes. Check the snap ring groove and the cap bore on both sides of the old joint.
Universal joints wear from dry bearings, damaged seals and sustained high driveshaft angles. Vibration at speed or a clunk when shifting into gear are common signs. When a joint is replaced, check the yokes for wear and confirm the driveshaft is balanced, since a worn yoke can shorten the life of a new joint.
- Measure the snap ring dimension
- Check cap diameter in both yokes
- Inspect the yokes for wear
Specifications
| Brand | Dana Spicer |
|---|---|
| UPC | 700000405467 |
| Series | 1310 |
| Retention style | Outside snap ring (OSR) |
| Outside snap ring dimension | 3.219 |
| Cap diameter | 1.062 |
Vehicle fitment
The joint is sold as Universal Fit. Universal joints are sized to particular driveshafts, so compare the series and dimensions with the joint being replaced first.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm your vehicle’s year, model and trim before ordering. Measure the snap ring dimension and cap diameter on your existing joint before fitting.














