Select your vehicle
-13%

G2 GM 10.5 Inch 14 Bolt Aluminum Cover – 40-2023AL

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Cast aluminum cover for GM 10.5 inch 14 bolt rear axles
  • Reinforcing ribs; heat treated and shot peened for direct impacts
  • Designed to dissipate heat and help cool the gear oil
  • Part number 40-2023AL, raw aluminum finish

Description

Overview

The cover is a raw aluminum differential cover made for GM 10.5 inch 14 bolt rear axles.

The cover is cast from lightweight aluminum and is designed to dissipate heat and help cool the gear oil, which supports longer bearing life. It is heat treated and shot peened to handle direct impacts, and reinforcing ribs add rigidity and strength.

Key features

  • Cast from lightweight aluminum to dissipate heat
  • Reinforcing ribs for added rigidity and strength
  • Heat treated and shot peened to handle direct impacts
  • Fully machined seal surface, which G2 says gives a leak free installation
  • Raw aluminum finish

Fluid and seal checks

A differential cover does more than keep dirt out. It seals the gear oil in and gives the housing a surface to shed heat through. Before fitting a new cover, clean both mating surfaces thoroughly and remove old sealant, since leftover material can prevent the new seal from sitting flat and cause a slow leak after the first few drives.

Gear oil condition matters as much as the cover. Check the fluid for metal flakes or a burnt smell when the cover is off, and look at the magnet for debris. If you tow or drive hard, inspect the fluid more often. Bolt the cover down in a crisscross pattern so the gasket compresses evenly.

  • Clean both mating surfaces before sealing
  • Inspect the magnet for metal debris
  • Tighten cover bolts in a crisscross pattern
  • Recheck for leaks after the first drives

Specifications

Brand G2 Axle and Gear
Part number 40-2023AL
UPC 631410096156
Axle location Rear
Axle type GM 14 bolt, 10.5 inches
Axle manufacturer GM
Material Aluminum
Oil capacity Extra capacity
Finish Raw aluminum (natural)

Vehicle fitment

G2 matches this cover to the GM 10.5 inch 14 bolt rear axle, not to named vehicles. Check your axle’s bolt count and ring gear size before ordering.

Only the GM 10.5 inch 14 bolt rear axle is named, so other axle sizes and bolt counts are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The differential cover is the item supplied. Check the package contents against your installation before starting.

SKU: G/240-2023AL Category:

Specification

Shipping weight 9.00 lbs
Package dimensions 13.00 × 13.00 × 5.00 in
brands

Questions & Answers

Does the G2 40-2023AL fit a GM 10.5 inch 14 bolt rear axle?

Yes. It is made for GM 10.5 inch 14 bolt rear axles. Confirm your axle's bolt count and ring gear size before ordering.

Does the aluminum cover help cool gear oil?

Yes. The cover is designed to dissipate heat and is intended to help cool the gear oil, supporting longer bearing life. Confirm your axle's bolt count and ring gear size before ordering.

How much oil does the cover hold?

Confirm the correct gear oil type and quantity for your axle before filling, then check the level once the cover is installed and the fluid has settled.

Should I replace the gasket when fitting an aluminum cover?

Yes, a new gasket is the usual practice whenever the cover comes off. Clean both mating surfaces of old sealant and debris, and use a gasket suited to your axle. Tighten the cover bolts evenly in a crisscross pattern so the seal compresses squarely.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon