Overview
The Centerforce N1764 is a throw out bearing, also called a clutch release bearing, for the 1994 to 2002 Jeep Wrangler and the 1994 to 1995 Jeep Cherokee XJ. It sits in the clutch release area of a manual transmission and carries the release force that disengages the clutch when the pedal is pressed.
It is built to withstand clutch wear in racing and to give reliable service race after race, with long life on the street. It is an OEM replacement and a direct fit for the vehicles covered below.
Key features
- Built to withstand the wear clutches face in racing use
- Designed for reliable service race after race
- Designed to provide longevity on the street
- It is an OEM replacement.
- Direct-fit design for the Wrangler and Cherokee XJ years stated below
Release bearing wear signs
The throw out bearing rides against the clutch fingers and moves them each time the pedal is pressed, so it carries load for its whole service life. Wear shows up as a squeal or growl when the pedal is down, a grinding sound that changes with pedal pressure, or a pedal that feels rough when it releases. Because the bearing is usually reached only when the transmission comes out, it is normally replaced with the clutch.
The fork and fork pivot also matter. A worn pivot, cracked boot or sloppy fork lets the bearing sit off-center, which speeds wear on both the bearing and the clutch fingers. Keep the bearing clean, avoid over-greasing the input shaft, and use only the lubricant suited to the bearing type.
- Squealing when the pedal is pressed
- Grinding that changes with pedal pressure
- Loose or cracked clutch fork boot
Specifications
| Brand | Centerforce |
|---|---|
| Part number | N1764 |
| UPC | 788442019568 |
| Product type | Throw out bearing (clutch release bearing) |
| Application | OEM replacement, direct fit |
Vehicle fitment
It is a direct fit for the 1994 to 2002 Jeep Wrangler and the 1994 to 1995 Jeep Cherokee XJ. No other model years are covered.
Not covered by the stated years: later Wrangler generations such as the JK, the Jeep Liberty (KJ), and Cherokee years other than 1994 and 1995. Confirm your vehicle’s year, model and trim before ordering.
What’s included
It is a single throw out bearing. Check the package contents against your installation before starting, since a clutch disc, pressure plate, release fork or hardware may be needed separately.









