Overview
The G2 Ford 8.8 Inch Aluminum Cover Black with Load Bolts, part number 40-2013-1ALB, is a black powder coated cast aluminum rear differential cover for Ford 8.8 inch and Mazda 8.8 inch axles. It protects the ring and pinion and is built to help the gear oil run cooler.
This version adds a magnetic drain plug, a dipstick and bearing cap support bolts, which G2 describes as isolating foreign debris from moving parts and adding strength. The product also states increased fluid capacity.
Key features
- Cast lightweight aluminum body that dissipates heat
- Magnetic drain plug and dipstick isolate foreign debris from moving parts
- Bearing cap support bolts for added strength
- Black powder coat finish
- Increased fluid capacity
Magnetic plugs and debris
A magnetic drain plug catches fine metal particles from the gear oil, which helps keep debris away from the gears and bearings. Dipsticks and bearing cap support bolts add to the setup, and each one changes what happens during service. Pulling the drain plug at each fluid change lets you check the magnet for debris, which can show early signs of gear or bearing wear.
If you are upgrading from a standard cover, check that the drain and fill points on your housing match the new hardware before starting. Clean the magnet with a rag rather than letting it fall into the oil. A black powder coat resists some scuffs, but the cover can still chip near the bolt holes, so inspect it after rough trips. Gear oil should be replaced on a regular schedule.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2013-1ALB |
| UPC | 631410110265 |
| Material | Cast lightweight aluminum |
| Finish | Black powder coat |
| Axle location | Rear |
| Axle sizes named | Ford 8.8 inch, Mazda 8.8 inch |
| Bolts | Load bolts (named in the product name) |
| Drain | Magnetic drain plug |
| Fluid capacity | Increased |
Vehicle fitment
The cover is made for Ford 8.8 inch and Mazda 8.8 inch rear axles. No years, models or trims are given, so the axle size is the main check before installing.
Confirm the axle size on your housing before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
This version adds a magnetic drain plug, a dipstick and bearing cap support bolts. Check the box contents against your installation before starting.












