Overview
The Crown Automotive transfer case overhaul kit, part number D18LMASKIT, fits Jeep CJ and Willys models from 1947 through 1979, including CJ5, CJ6 and CJ7 vehicles, Commando, FC forward-control trucks, Gladiator, J-series trucks, J10 and J20 pickups and Jeepster.
Check the kit contents against your transfer case before ordering, including the gears, bearings and seals it covers.
Key features
- Overhaul kit identified as D18LMASKIT
- Listed years run from 1947 through 1979
- Covers CJ5, CJ6 and CJ7 models among its listings
- Direct-fit description from Crown Automotive
Teardown and reassembly
A teardown for an overhaul starts with draining the fluid, removing the output and input assemblies, and labeling every part as it comes off. Keep the shift forks, rails and detents in their original order, since reassembly depends on the correct arrangement. Wash the housing and parts in clean solvent, and let them dry fully before any measuring or fitting takes place.
Reassembly is where most of the care pays off. Set bearing preload and gear mesh before the case is closed, and check that the shafts turn freely through the full range. Use fresh gaskets and seals, and refill with the fluid suited to the transfer case. A test drive in low and high range afterward helps confirm that the shifts engage cleanly.
- Drain fluid and label parts during teardown
- Keep shift forks and detents in order
- Wash and dry all parts before measuring
- Check shaft rotation before closing the case
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | D18LMASKIT |
| Part type | Transfer case overhaul kit |
| Listed years | 1947–1979 |
| Fitment type | Direct fit |
Vehicle fitment
It fits Willys 1-Ton (1947–1955), 463 (1949–1950), 473 (1951–1952), CJ-3 (1954–1958), CJ-5 (1955–1958), CJ-6 (1956–1958), Jeep CJ3 (1959), CJ5 (1959–1979), CJ6 (1959–1975), CJ7 (1976–1979), Commando (1966–1973), FC150 and FC170 (1957–1965), FC170HD (1963–1965), Gladiator (1962–1965), J-series trucks J-200 through J-4800 (1963–1973), J10 and J20 (1974–1979) and Jeepster (1966–1971).
The list does not include Cherokee, Wagoneer or Wrangler models. Confirm your vehicle’s year, model and trim before installing.
Installation notes
A full transfer case teardown is usually needed for an overhaul, so have a qualified technician confirm the kit suits your unit before disassembly begins.
What’s included
Check the kit contents against your transfer case teardown before starting work.
Not included: The transfer case housing is not part of this kit.










