Overview
The Omix-Ada 36-tooth short shaft speedometer gear, part number OAI18760.21, replaces the speedometer gear on 93-01 Jeep Cherokee, 93-98 Grand Cherokee and 93-06 Wrangler models with electrically driven speedometers. It is a direct OE replacement that bolts on.
The gear carries a Universal Fit tag, but it is made for the 93-01 Jeep Cherokee, 93-98 Grand Cherokee and 93-06 Wrangler models shown above.
Key features
- 36 teeth on a short shaft
- Direct OE replacement, per the brand
- Bolt-on installation
- Intended for electrically driven speedometers
Signs the gear is worn
A speedometer gear sits on the transmission output and turns the speed sensor that feeds the speedometer. When its teeth chip or round off, the speedometer may read low, jump, or stop, and the odometer can fall behind actual mileage. A needle that hunts at steady speed is another sign worth checking early.
When replacing the gear, check the speed sensor and its wiring, since the two are often serviced together. Clean the sensor face and inspect the connector for corrosion. Keep the old gear for comparison so the tooth count and shaft length can be checked against the new one before it goes in.
- Speedometer reading drops or jumps at steady speed
- Odometer falls behind expected mileage
- Gear teeth look chipped or rounded
- Corrosion on the speed sensor connector
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI18760.21 |
| Teeth | 36 |
| Shaft | Short |
| Speedometer type | Electrically driven |
Vehicle fitment
It fits 93-01 Jeep Cherokee, 93-98 Grand Cherokee and 93-06 Wrangler models with electrically driven speedometers.
It does not cover other Cherokee or Grand Cherokee generations, or Wrangler years outside 93-06.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before fitting, confirm the speedometer is electrically driven and compare the 36-tooth count with your original gear. The gear bolts into place.










