Select your vehicle

Crown Automotive Transfer Case Overhaul Kit – D18EMASKIT

Crown Automotive

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Transfer case overhaul kit, part D18EMASKIT
  • Fits Willys and early Jeep models from 1946 to 1965
  • Crown Automotive direct-fit description

Description

Overview

The Crown Automotive transfer case overhaul kit, part number D18EMASKIT, is an overhaul kit for transfer cases on early Jeep and Willys vehicles. It fits Willys CJ-2, CJ-3, 1-Ton, Sedan Delivery and Utility Wagon, Jeep CJ3, FC forward-control trucks, Gladiator and J-200 through J-3800 trucks from 1946 to 1965.

Check the kit contents against your transfer case teardown before ordering, including the gear and bearing count and whether the kit covers every transfer case within those years.

Key features

  • Transfer case overhaul kit identified as D18EMASKIT
  • Listed years run from 1946 through 1965
  • Covers Willys, FC, Gladiator and J-series models in the list
  • Direct-fit description from Crown Automotive

Overhaul planning

A transfer case overhaul usually means full disassembly, so plan the work around a clean bench and a complete set of tools. Mark the position of shims and clips as you go, and keep the parts from each shaft separated. Measure the bearing journals and bores before reassembly, because small wear can change gear mesh enough to cause noise.

Gears and bearings should be inspected as a set, since one worn part often means the others are close behind. Clean every part thoroughly, check the shift linkage and detent for wear, and set gear mesh and endplay carefully when assembling. Confirm the kit matches your unit before starting, so the work is not stopped halfway through.

  • Mark shims and clips during teardown
  • Measure bearing journals and bores
  • Inspect gears and bearings as a set
  • Check the shift linkage and detent

Specifications

Brand Crown Automotive
Part number D18EMASKIT
Part type Transfer case overhaul kit
Listed years 1946–1965
Fitment type Direct fit

Vehicle fitment

It fits Willys CJ-2 (1946–1949), 1-Ton (1947–1955), 463 (1949–1950), 473 (1951–1952), CJ-3 (1949–1952 and 1954–1958), Sedan Delivery (1951) and Utility Wagon (1955); Jeep CJ3 (1959); FC150 and FC170 (1957–1965); FC170HD (1963–1965); Gladiator (1962–1965); and J-200 through J-3800 trucks (1963–1965).

The list does not include CJ5, CJ6, CJ7, Cherokee or Wagoneer models, or any model built after 1965. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Plan on full disassembly for an overhaul, and have a qualified transfer case technician confirm the kit matches your unit before work starts.

What’s included

Check the kit contents against your transfer case before starting disassembly.

Not included: The transfer case housing is not part of this overhaul kit.

Fitment

VehicleYearsTrims
Jeep CJ31959Base
Jeep FC1501957–1965Base
Jeep FC1701957–1965Base
Jeep FC170HD1963–1965Base
Jeep Gladiator1962–1965Base
Jeep J-2001963–1965Base
Jeep J-2101963–1965Base
Jeep J-2201963–1965Base
Jeep J-2301963–1965Base
Jeep J-25001965Base
Jeep J-26001965Base
Jeep J-27001965Base
Jeep J-28001965Base
Jeep J-3001963–1965Base
Jeep J-3101963–1965Base
Jeep J-3201963–1965Base
Jeep J-3301963–1965Base
Jeep J-35001965Base
Jeep J-36001965Base
Jeep J-37001965Base
Jeep J-38001965Base
Jeep Willys 1-Ton1947–1955All
Jeep Willys 4631949–1950All
Jeep Willys 4731951–1952All
Jeep Willys CJ-21946–1949All
Jeep Willys CJ-31949–1952, 1954–1958All
Jeep Willys Sedan Delivery1951All
Jeep Willys Utility Wagon1955All

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is Crown Automotive overhaul kit D18EMASKIT?

It is a transfer case overhaul kit, part number D18EMASKIT, sold by Crown Automotive. Check the kit contents against your transfer case teardown before installing.

Which Jeep and Willys vehicles does this overhaul kit fit?

It fits 1946 to 1965 models, including Willys CJ-2, CJ-3, 1-Ton, Sedan Delivery and Utility Wagon, Jeep CJ3, FC forward-control trucks, Gladiator and J-series trucks. Confirm your vehicle's year, model and trim before installing.

Does this kit fit a Jeep CJ5 or CJ7?

Jeep CJ5 and CJ7 models are outside its coverage, which ends in 1965. Confirm fit for your vehicle's year, model and trim before ordering.

Should the transfer case housing be inspected during an overhaul?

Yes. Check the housing bores, mounting faces and bearing seats for wear or cracks. The housing is not part of this kit, so any damage found must be handled separately before reassembly.

Are gaskets and seals usually replaced during an overhaul?

They usually are. Fresh gaskets and seals help prevent leaks after the transfer case is reassembled, and the work is simplest to do while the case is already open.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon