Overview
The Crown Automotive J3170700 is a rear inner axle shaft seal for the AMC Model 20 rear axle. It is a replacement seal for the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler.
Crown Automotive has made replacement parts for Jeep vehicles for more than 50 years, with more than 8,000 part numbers. This seal is one of those replacement parts, including some factory-discontinued items.
Seal replacement tips
An axle shaft seal keeps gear oil in the axle housing and dirt and water out of the bearing area. Leaks often show up as dark oil on the inside of the wheel or brake components, and a failed seal can damage the bearing if left alone. When the seal is out, inspect the axle shaft and bearing for wear, since a seal is only as good as the surfaces it runs against.
Clean the seal bore and remove any old sealant or burrs before pressing in the new seal, and install it square so the lip sits evenly. Check the axle oil level and condition after replacing a seal, and look for leaks during the first few drives. Replacing the outer seal at the same time is a good idea when both are accessible.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3170700 |
| UPC | 848399058055 |
| Position | Rear inner |
| Application | AMC Model 20 rear axle |
| Seal type | Axle shaft inner seal |
| Fit | Direct fit |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler, all with the AMC Model 20 rear axle.
The list ends at 1983 for the CJ5, 1986 for the CJ7 and 1985 for the Scrambler, so later model years are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear inner axle shaft seal. The outer seal is a separate part.









