Overview
The Omix-Ada OAI18603.52 is a Dana 20 transfer case tailshaft gasket. It fits Jeep CJ3, CJ5 and CJ6 models, and Willys MB and Willys CJ-2 through CJ-6 vehicles.
It is a direct fit, and coverage runs from the 1941–1942 Willys MB through the 1959–1960 and 1966–1971 CJ5 and CJ6 models. Match your exact year and model first.
Key features
- Tailshaft gasket for the Dana 20 transfer case
- Eight fitment entries cover Jeep CJ and Willys models
- Direct fit for the covered Willys and Jeep models.
- Includes early Willys MB and CJ-2 through CJ-6 entries
Tailshaft sealing on older Jeeps
The tailshaft gasket seals the joint where the tailshaft housing meets the transfer case. On older Jeeps, the gasket and the nearby housing face can both age, so leaks are often a combination of hardened material and uneven surfaces. Look for oil around the joint, below the case, and on the transmission crossmember.
When the tailshaft is removed, clean the housing face and check it for warp or damage. Old gasket material should come off completely so the new gasket can compress evenly. Inspect the tailshaft bushing and the output seal at the same time, since they affect the same area. Check the lubricant level once the job is complete.
- Clean both housing faces
- Inspect the bushing and output seal
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI18603.52 |
| Transfer case | Dana 20 |
| Component | Tailshaft gasket |
Vehicle fitment
Fits 1941–1942 Willys MB (Base); 1946–1949 Willys CJ-2; 1949–1958 Willys CJ-3; 1955–1958 Willys CJ-5; 1956–1958 Willys CJ-6; 1959–1960 Jeep CJ3 (Base); and 1959–1960 and 1966–1971 Jeep CJ5 and CJ6 (Base).
Jeep models from 1972 onward and other years are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The product is the tailshaft gasket.
Not included: the transfer case, tailshaft and other seals or gaskets.









