Transfer Case Parts
Showing 37–48 of 282 resultsSorted by popularity
-
Dual Transfer Case Adapter Kit
Advance Adapters GM SM420 Transmission To Dana 18/20 Transfer Case Adapter – 50-2400
Dual Transfer Case Adapter KitAdvance Adapters GM SM420 Transmission To Dana 18/20 Transfer Case Adapter – 50-2400
- GM SM420 transmission to Dana 18 or Dana 20 transfer case adapter
- 4.50 inch long, 356-T6 aluminum alloy
- Requires a retainer and sealed bearing, sold separately
- Includes new transmission main shaft and mount block
- Part number 50-2400
SKU: ADV50-2400 -
Dual Transfer Case Adapter Kit
Advance Adapters GM 4L60E Transmission To NP231 23 Spline Transfer Case Adapter – 50-0402
Dual Transfer Case Adapter KitAdvance Adapters GM 4L60E Transmission To NP231 23 Spline Transfer Case Adapter – 50-0402
- Adapts a GM 4L60E transmission to a Jeep New Process 23-spline transfer case
- Adapter housing 3.600 inch long, aluminum alloy
- Overall transmission and adapter length 26.975 inch
- Includes output shaft, VSS sensor, reluctor ring and hardware
- Part number 50-0402
SKU: ADV50-0402 -
Transfer Case Shifter Boot
Warrior Shifter Cover (Black) – 90440PC
- Black powder coat aluminum diamond plate shifter cover
- Direct factory replacement that uses the original mounting holes, no drilling required
- Fits 1980–1986 Jeep CJ7 models with the Dana 300 transfer case
- Warrior part number 90440PC, UPC 634146904429
SKU: W/I90440PC -
-
-
-
Transfer Case Shifter
Trail Gear Twin Stick Kit – 107500-1-KIT
- Trail Gear Twin Stick Kit, part number 107500-1-KIT, for independent control of high/low and 2WD/4WD
- Fits 1984-1995 Toyota 4Runner (DLX, SR5) and 1980-1995 Toyota Pickup models
- Allows low range in 2WD and shifting in and out of 4WD while driving
- Top shift design; UPC 70000621419
SKU: TGI107500-1-KIT -
Transfer Case Overhaul Kit
Trail Gear Transfer Case Overhaul Kit – 105038-3-KIT
- Trail Gear transfer case overhaul kit, part number 105038-3-KIT
- Fits 1986-1995 Suzuki Samurai (Base, JA, JL, JX, JX SE)
- Major gaskets, seals and bearings, including roller bearings
- Includes replacement locking flange nuts
SKU: TGI105038-3-KIT -
-
Transfer Case Mount Kit
Trail Gear Bomb Proof Transfer Case Mount Kit – 105033-3-KIT
- Trail Gear Bomb Proof transfer case mount kit, part number 105033-3-KIT
- Heavy duty aluminum mounts for lower-than-stock transfer case gears
- Kit includes three spacers and mounting hardware
- Fits 1986 to 1995 Suzuki Samurai
SKU: TGI105033-3-KIT
What the transfer case does
The transfer case sits behind the transmission and splits power between the front and rear driveshafts. It also provides the low range that gives a 4x4 its crawling gear. Because it is full of gears, chains, and bearings, wear shows up as leaks, noise, popping out of gear, or trouble shifting. Most of the parts here help with repair, maintenance, and modification.
Parts you will find
- Seals and gaskets: output shaft seals, input seals, and washers that stop fluid leaks.
- Bearings and sprockets: main drive sprocket bearings, bearing cups, and related internals for rebuilding.
- Yokes: output and slip yokes, including types used with slip yoke eliminator kits.
- Slip yoke eliminator kits: convert the rear output to a fixed yoke, which is used with a lifted vehicle and a driveshaft with a constant velocity joint.
- Lowering kits: reposition the case to improve driveline angles after a lift.
- Overhaul kits: sets with a group of wear parts for a rebuild.
- Switches and shift knobs: electrical parts like indicator lamp switches, and the control hardware.
Identifying your case
Transfer cases look alike, but the internals differ. Common examples include the NP231 and other models used in Jeeps. Check the tag or plate on the case, and compare the model, spline count, and rotation, since a part that is slightly off may not seal or mesh. Listings often specify case model and vehicle years, so confirm both, and match whether the part is for the front or rear output.
Maintenance and installation
Many leaks come from the output seals and the vent. Replacing a seal usually means removing the yoke, so mark its position and tighten the nut to the specified torque. Replace the fluid with the type specified for your case, because using the wrong oil can damage clutch components or cause noise. A transfer case rebuild requires care, a clean workspace, and the right tools, so a professional may be the better choice for internal work.
After a lift, have the driveline angles reviewed, since steep angles cause vibration and wear. Slip yoke eliminators and lowering kits change geometry and should be installed correctly. Always confirm fitment for your exact year, make, model, and transfer case with the manufacturer's specifications.
Inspection and common mistakes
Check the fluid level and condition first. Milky fluid points to water entering through a bad vent or seal, and a burnt smell can point to overheating. Make sure the vent is clear and the vent hose is routed up high. Inspect the shift linkage and bushings, because sloppy linkage is often blamed on the case itself. Before ordering parts, find any numbers cast into the housing and compare them against your records. Do not mix parts from different case families, and replace seals in pairs when you can. After a repair, road test for leaks, noise, and smooth engagement in each range, and check for driveline vibration, which can show up as a shudder under load.
Keep a log of fluid changes and any leaks you fix, and carry a spare seal and a small quantity of the correct fluid on remote trips, since a slow leak found early is far cheaper than a failed case.
Popular Transfer Case Parts brands
- Crown Automotive (107)
- Omix-Ada (65)
- Trail Gear (22)
- Jeep (18)
- Advance Adapters (13)
- Rugged Ridge (12)
- TeraFlex (11)
- G2 Axle and Gear (11)
- Rubicon Express (6)
- RT Off-Road (5)
- Drake (5)
- Alloy USA (2)
Shop Transfer Case Parts by type
- Transfer Case Slip Yoke Eliminator Kits and Hardware (18)
- Transfer Case Yoke (20)
- Transfer Case Output Shaft Seal (16)
- Transfer Case Shift Knob (16)
- Transfer Case Overhaul Kit (14)
- 1945-71 Model 18 Transfer Case (13)
- Transfer Case Shift Fork (11)
- Transfer Case Shifter Boot (11)
- Transfer Case Gasket (10)
- Transfer Case Shifter (10)
- Dana Model 300 Transfer Case (8)
- Transfer Case Drive Chain (7)
- Transfer Case Output Shaft Bearing (7)
- Transfer Case Seal (5)
- Transfer Case Vacuum Switch (6)
- Transfer Case Input Shaft Seal (6)
- Transfer Case Low Gearset (5)
- Transfer Case Mount (4)
- Dual Transfer Case Adapter Kit (4)
- Transfer Case Shift Rail Spring (4)
- Transfer Case Output Shaft Race (3)
- Transfer Case Output Shaft Nut (3)
- Transfer Case Housing Extension (3)
- Transfer Case Input Gear Bearing (3)
- Transfer Case Shift Mode Selector (3)
- Liberty NP231 Transfer Case (3)
- Transfer Case Bearing (3)
- Transfer Case Shift Linkage (3)
- Transfer Case Intermediate Gear (2)
- Transfer Case Shift Lever Bushing (2)
Transfer Case Parts FAQ
How do I know which transfer case I have?
Look for the tag or tag number on the case and check your vehicle's documentation. Model, year, and drivetrain all help narrow it down. Because internals differ between cases, confirm the exact model before choosing parts.
What is a slip yoke eliminator?
It is a kit that replaces the sliding rear yoke with a fixed one, so the driveshaft uses a slip section instead and the output shaft is supported better. It is often used after a lift, and it usually requires a new driveshaft.
What causes a transfer case to leak?
Worn output or input seals, a clogged vent, a bad gasket, or a damaged yoke are common causes. Check the fluid level, find the source, and replace the failing part before running the case low on oil.
Can I rebuild a transfer case myself?
If you are experienced with drivetrain work, yes, with a service manual and the right tools. Internal rebuilds are detailed, and mistakes can be costly. Many owners choose a shop for anything beyond seals or a fluid change.









