Overview
The Pro Comp 920506 is a rear ES9000 Series gas charged shock absorber for the 1995 to 2004 Toyota Tacoma, sold individually. It covers the Base, Limited, Pre Runner and SR5 versions of that generation.
The shock measures 20.59 inches extended and 12.70 inches collapsed, which gives 7.89 inches of travel. Both mounts are loop style. Pro Comp rates it for a 0 to 2.5 inch lift, so it suits a Tacoma with a modest rear lift. The twin tube body uses a nylon banded piston head and 10 stage velocity sensitive valving.
Key features
- Rear position for first-generation Tacoma trucks
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded loop-style mounts
Rear shock wear on a Tacoma
On a rear axle, shocks control leaf spring or coil movement and keep the tires in contact with the road. When they wear, the truck may bounce after bumps, sway through corners, or feel loose on rough trails. Worn loop bushings and tired bump stops often show up at the same time, so inspect them together.
Mounting hardware deserves attention when a rear shock is replaced. Loop eyes can wear or crack, and bushings compress over time. Clean threads, correct torque, and a quick recheck after the first few drives help the new unit settle properly.
- Look for fluid residue on the body
- Check loop eyes and bushings for play
- Inspect bump stops for cracking
- Recheck mounting bolts after initial use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 920506 |
| UPC | 614901696295 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 20.59 in |
| Collapsed length | 12.70 in |
| Travel length | 7.89 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 2.5 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It is a rear shock for the 1995 to 2004 Toyota Tacoma in Base, Limited, Pre Runner and SR5 versions.
Second-generation Tacoma trucks from 2005 onward are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Loop mounts at both ends mean the shock needs loop-style mounting points or bushings. Check your rear height against the 0 to 2.5 inch lift range before installing.
What’s included
One rear shock absorber, sold as each. It ships without a boot.











