Overview
The Pro Comp 921500 is a rear ES9000 Series gas charged shock absorber with loop-style mounts at both ends, sold individually. It measures 21.61 inches extended and 13.22 inches collapsed, which gives 8.39 inches of travel.
It is rated for a 0 to 2 inch lift. Loop mounts at both ends mean the lengths and mount spacing are the key points to check against the shock you are replacing. Shock boots are sold separately.
Key features
- Rear position with loop mounts
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Loop mount hardware
Loop mounts depend on the brackets, bushings and pins that hold them, so the hardware can matter as much as the shock itself. Before installing, check whether the loop eyes fit the pin diameter and whether the bushings are the correct width. Mismatched hardware can cause clunking, uneven wear and a shock that does not sit square.
Rear loop mounts often see movement from the axle and the leaf springs, which can cause rubber bushings to crack or compress over time. Replace any bushings that show splits, bulges or flattening, and inspect the bracket welds for cracks. A small amount of grease on the bushing contact faces can help with installation and reduce squeaks.
- Match pin diameter to the loop eye
- Check bushing width before assembly
- Inspect bracket welds for cracks
- Replace compressed bushings during the job
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 921500 |
| UPC | 614901071191 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 21.61 in |
| Collapsed length | 13.22 in |
| Travel length | 8.39 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 2 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Fit depends on the loop mount spacing and the 21.61 inch extended length, so compare both with the rear shock you are replacing. Match your vehicle’s year, model and trim to the fit before ordering.
Rear shocks with loop mounts come in several lengths, so a matching mount type alone does not confirm fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Loop mounts at both ends need matching loop brackets or bushings. The 0 to 2 inch lift range means the shock suits trucks near stock height.
What’s included
One rear shock, sold individually. Shock boots are sold separately.
























