Overview
The Pro Comp 920510 is a rear ES9000 Series gas charged shock absorber with a stem mount on top and a loop mount below, sold individually. It fits Ford Expedition and F-150 trucks, F-250 trucks, Suzuki Sidekick and X-90 models, and Toyota Tacoma trucks.
The shock is 20.59 inches extended and 12.45 inches collapsed, which gives 7.79 inches of travel. Pro Comp rates it for a 0 to 1 inch lift. The zinc finish is different from the white coating on other ES9000 numbers, and the twin tube body uses a nylon banded piston head and 10 stage velocity sensitive valving.
Key features
- Rear position with a stem upper mount and loop lower mount
- Zinc finish
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
Stem and loop mounts
Stem and loop mounts use different hardware than many factory layouts, so the attachment points matter as much as the shock length. A stem mount takes a threaded post through a bushing or bracket, while a loop mount wraps around a pin or bolt. Before fitting, check that the bushings, sleeves and bracket holes match the ones on your truck.
Loop bushings wear faster than many rubber mounts, especially on trucks used off road, so inspect them whenever the shock is removed. Look for splits, flattened sections or metal-to-metal contact. Replacing worn bushings during the same job is a sensible step because it saves time spent disassembling the rear end later.
- Confirm the stem and loop hardware fits your bracket
- Replace worn or split bushings during the job
- Use the correct washers and sleeves
- Check the zinc finish for corrosion after exposure to road salt
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 920510 |
| UPC | 614901071139 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 20.59 in |
| Collapsed length | 12.45 in |
| Travel length | 7.79 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 1 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1997 to 2002 Ford Expedition in Eddie Bauer and XLT versions, the 1997 to 2003 Ford F-150, the 1997 to 1999 Ford F-250, the 1989 to 1998 Suzuki Sidekick, the 1996 to 1998 Suzuki X-90 and the 2005 to 2015 Toyota Tacoma. Years outside these ranges and the Suzuki Samurai are not covered, so check the year, model and trim before buying.
Models from outside these years, and the Suzuki Samurai, are not covered by this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem and loop mounts differ from the factory layout on most models, so compare the mounting points before you buy. The rated lift is 0 to 1 inch, which suits trucks close to stock height.
What’s included
One rear shock with its stem and loop mounts. The boot is not included.











