Overview
The Pro Comp 919514 is an ES9000 Series gas charged shock absorber with a twin tube body, sold individually. It measures 19.73 inches extended and 12.03 inches collapsed, which gives 7.70 inches of travel. Both the upper and lower mounts are factory style.
Match this shock by its lengths and mounting points rather than by series name. The 10 stage valving and nylon banded piston head match the rest of the ES9000 range. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Factory-style upper and lower mounts
Choosing a replacement shock
Replacing a shock starts with measuring the old unit. Measure it fully extended and fully collapsed, then compare those figures with the new shock. A replacement with the wrong working length can leave the suspension bottoming out at one end of its travel, so length matters more than the series name. Look at the mounts too. Eye and stud styles, bushing sizes and mount widths vary, and a shock with the right length can still fail to bolt in.
Gas charged twin tube shocks like this one are a common choice for daily driving and light trail use because the gas charge helps resist fade during repeated compression. After installation, check the seals for leaks and the mount bushings for wear, especially after rough trail sessions.
- Measure the old shock fully extended and fully collapsed
- Compare mount style and bushing size before buying
- Replace shocks in pairs on the same axle
- Inspect bushings and seals every few months
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 919514 |
| UPC | 614901071016 |
| Shock series | ES9000 |
| Extended length | 19.73 in |
| Collapsed length | 12.03 in |
| Travel length | 7.70 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Compare the 19.73 inch extended and 12.03 inch collapsed lengths with the shock you are replacing. Confirm fit for your vehicle’s year, model and trim before ordering.
Two Pro Comp part numbers in the 919500 range have near-identical lengths but different mounts, so check the mount type as well as the length. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With factory mounts at both ends, the shock should fit where the stock unit sat. Compare the mounting hardware before you start the job.
What’s included
One shock absorber, sold individually with no boot.












