Select your vehicle

Pro Comp ES9000 Series Shock Absorber – 920590

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES9000 Series shock absorber, part number 920590
  • Extended 20.59 in, collapsed 12.70 in, travel 7.89 in
  • Factory upper and lower mounts; front position
  • Listed with a 6 inch lift

Description

Overview

The Pro Comp 920590 is a front ES9000 Series twin tube shock absorber designed for a 6 inch lift. It measures 20.59 inches extended and 12.70 inches collapsed, giving 7.89 inches of travel, and it uses factory upper and lower mounts.

The 10 stage velocity sensitive valving is designed for a smooth high ride and better off-road handling. The 1 3/8 inch nylon banded full displacement piston head and double welded shock mounts are built for strength and long use.

The shock is not adjustable and has no remote reservoir. It has a white finish, is sold as each, and no boot is included.

Key features

  • Front position
  • Designed for a 6 inch lift
  • Factory upper and lower mounts
  • 10 stage velocity sensitive valving
  • Double welded shock mounts

Front shocks and lift height

Front shocks work against the weight of the engine and the steering loads, so their condition affects steering feel as well as ride. A front shock designed for a set lift height is sized to use its travel at that height. Changing the height without checking the shock can leave it working near the ends of its range.

When replacing front shocks, inspect the upper and lower mounts and the bushings at each end. Look for leaks on the shock body and for play when the wheel is moved by hand. A front shock that bottoms out or feels loose should be replaced, ideally in pairs on the same axle.

  • Measure ride height before and after the change
  • Check steering play along with the shocks
  • Inspect front mounts at each service

Specifications

Brand Pro Comp Suspension
Part number 920590
UPC 614901920598
Shock series ES9000 Series
Position Front
Lift height 6 in.
Extended length 20.59 in
Collapsed length 12.70 in
Travel length 7.89 in
Upper mount Factory
Lower mount Factory
Adjustable No
Remote reservoir No
Finish White
Boot Not included
Sold as Each

Vehicle fitment

Confirm your year, model and trim before ordering this front shock. Check that the front suspension height matches the 6 inch lift and the 20.59 inch extended length before buying.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the shock is designed for a 6 inch lift, the front suspension height has to be at that setting for the stated travel to apply. Check the ride height after installation.

What’s included

One front ES9000 Series shock absorber, sold each, with no boot.

SKU: EXP920590 Category:

Specification

Shipping weight 4.61 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

What lift is the 920590 designed for?

It is designed for a 6 inch lift in the front position. The extended length is 20.59 inches and the collapsed length is 12.70 inches, with 7.89 inches of travel.

Does the 920590 use factory mounts?

Yes. It has factory upper and lower mounts, so it replaces the original front shock at the same mounting points.

Is the 920590 adjustable?

No. It is not adjustable and has no remote reservoir. It is finished in white, sold as each, and no boot is included.

Should rear shocks be changed with front ones after a lift?

Often yes, especially when the lift changes ride height at both ends. Mismatched front and rear shocks can make the vehicle feel unsettled. Check the rear shock length and travel against the new height before deciding.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon