Overview
The Pro Comp 919500 is an ES9000 Series gas charged shock absorber with a twin tube body, sold individually. It measures 19.84 inches extended and 12.32 inches collapsed, which gives 7.52 inches of travel. Both mounts are loop style.
No vehicle fitment is available for this part number. Use the 19.84 inch extended and 12.32 inch collapsed lengths and the loop mounts to compare it with the shock you are replacing. The shock boot is sold separately.
Key features
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Loop-style upper and lower mounts
Loop-style shock mounts
Loop mounts use a rounded eye at each end, usually held by a bolt or pin through a bushing. The eye has to match the bracket or bushing on the vehicle, so the first step is to confirm the bushing diameter and the bracket style. Loose or worn eye bushings allow the shock to knock at the ends and can wear the eye bore over time.
Loop mounts are common on certain older vehicles and classic builds. Replace the bushings whenever the shock is removed, and grease the pin before reinstalling if the design allows. Keep the washers and spacers in the order they came off so the shock sits square and does not bind when the suspension moves through its range.
- Confirm bushing diameter and bracket style
- Replace eye bushings when the shock is removed
- Grease the pin before reinstalling if possible
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 919500 |
| UPC | 614901070910 |
| Shock series | ES9000 |
| Extended length | 19.84 in |
| Collapsed length | 12.32 in |
| Travel length | 7.52 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Measure the shock you plan to replace, then compare its 19.84 inch extended and 12.32 inch collapsed lengths with this unit. Check that the eye sizes match before buying.
Other ES9000 part numbers have their own fitment and lengths, so do not assume this one matches a neighbouring number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Loop mounts on both ends mean the shock needs loop-style brackets or bushings. Confirm the eye sizes match your vehicle before you buy.
What’s included
One shock absorber. Shock boots are sold separately from this part.









