Overview
The Pro Comp 919510 is a front ES9000 Series gas charged shock absorber for Ford Bronco, Bronco II, F-100, F-150, F-250 and Ranger trucks, plus the International Scout II, sold individually. It covers three decades, from 1966 to 1996 for the Bronco and F-150.
The shock is 19.73 inches extended and 12.03 inches collapsed, which gives 7.70 inches of travel. The mounts are factory style at both ends. The twin tube body uses a nylon banded piston head and double welded mounts, with 10 stage velocity sensitive valving.
Key features
- Front position for classic Ford 4×4 and light trucks
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Classic Ford 4×4 front ends
Classic Ford 4x4s and light trucks were often built with simple leaf or coil front suspensions, and their shocks do much of the work of controlling wheel motion off road. As these trucks age, rubber bushings harden, bump stops crack and the damping fades, which leaves the front end wandering at speed. A new shock restores control, but it works best when the rest of the front end is sound.
Before installing, look for rust at the shock mounts and check the upper bracket for cracks. Vintage trucks sometimes have bent brackets or worn bushings from years of trail use, and those parts should be repaired before the new shock goes on. Tighten all fasteners to the torque in your service manual and recheck them after the first drive.
- Inspect upper brackets for rust and cracks
- Replace hardened bushings and bump stops
- Recheck fasteners after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 919510 |
| UPC | 614901070996 |
| Shock series | ES9000 |
| Position | Front |
| Extended length | 19.73 in |
| Collapsed length | 12.03 in |
| Travel length | 7.70 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It is a front shock for the 1966 to 1996 Ford Bronco, the 1984 to 1990 Bronco II, the 1980 to 1983 F-100, the 1977 to 1996 F-150, the 1980 F-250, the 1983 to 1989 Ranger, the 1993 to 1995 F-150 Lightning and the 1971 to 1980 International Scout II.
Ford Explorer, Ford Ranger models from 1990 onward and F-series trucks outside these years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory mounts keep the shock at the original front points. Because this shock covers several decades of trucks, compare its 19.73 inch extended length against the shock you are replacing before fitting.
What’s included
One front shock absorber. Boots are not part of the package.











