Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 445–456 of 3453 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
King OEM Performance Series JL/JT 2.0 Front Internal Reservoir Shock – 20C001-373
Shock Absorbers & Shock AccessoriesKing OEM Performance Series JL/JT 2.0 Front Internal Reservoir Shock – 20C001-373
- Front 2.0 Performance Series monotube shock for the 2018 to 2026 Jeep Wrangler JL and 2020 to 2026 Gladiator
- 2.0-inch body with OEM top and bottom mounts
- Gas charged, with stock height or custom length options
- Part number KST20C001-373
SKU: KST20C001-373 -
Shock Absorbers & Shock Accessories
King OEM Performance Series JL 2.0 Rear Internal Reservoir Shock – 20C001-374
Shock Absorbers & Shock AccessoriesKing OEM Performance Series JL 2.0 Rear Internal Reservoir Shock – 20C001-374
- Rear monotube shock for the 2018 to 2026 Jeep Wrangler JL, 2.0 Performance Series
- 2.0-inch body with OEM top and bottom mounts
- Gas charged, suited to stock height or custom lengths for lifted trucks
- Part number KST20C001-374
SKU: KST20C001-374 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics VS 2.5 Series Rear Piggyback Reservoir Shock Set – 77703P
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics VS 2.5 Series Rear Piggyback Reservoir Shock Set – 77703P
- Rear VS 2.5 Series piggyback reservoir shock set for select 2019 to 2022 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks
- Internal bump zone adds about 20 percent more damping force.
- Vehicle-specific length and damping tune for each application
- Part number ICO77703P, rebuildable and revalveable
SKU: ICO77703P -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics VS 2.5 RXT Series Rear Remote Reservoir Shock Set – 59923P
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics VS 2.5 RXT Series Rear Remote Reservoir Shock Set – 59923P
- Rear VS 2.5 RXT Series remote reservoir shock set for the 2007 to 2021 Toyota Tundra
- Externally adjustable bypass valve with 28 compression and rebound settings
- 6061 billet aluminum manifold creates an internal bump zone
- Part number ICO59923P, 100 percent rebuildable and revalveable
SKU: ICO59923P -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics VS 2.5 Omega Series Rear Bypass Remote Reservoir Shock Set – 59910P
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics VS 2.5 Omega Series Rear Bypass Remote Reservoir Shock Set – 59910P
- Rear Omega Series bypass remote reservoir shock set with 28 valve settings
- Fits the 2010 to 2023 Lexus GX460, 2003 to 2009 Lexus GX470, 2003 to 2023 Toyota 4Runner and 2007 to 2014 Toyota FJ Cruiser
- Bump zone from a 6061 billet aluminum manifold
- Part number ICO59910P, rebuildable and revalveable
SKU: ICO59910P -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics VS 2.5 Omega Series Front Bypass Remote Reservoir S2 Secondary Shock Set – 59922P
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics VS 2.5 Omega Series Front Bypass Remote Reservoir S2 Secondary Shock Set – 59922P
- Front Omega Series bypass remote reservoir secondary shock set for the 2007 to 2021 Toyota Tundra
- Externally adjustable bypass valves with 28 compression and rebound settings
- 6061 billet aluminum manifold creates a bump zone for high-speed compression
- Part number ICO59922P, 100 percent rebuildable
SKU: ICO59922P -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics VS 2.0 Aluminum Series Rear Shock – 96519
- Rear VS 2.0 Aluminum Series shock for the 2019 to 2023 Ford Ranger
- Rated by ICON for lifts of up to 1.5 inches
- Gas charged monotube with internal reservoir and vehicle-specific valving
- Part number ICO96519, rebuildable and revalveable
SKU: ICO96519 -
Shock Absorbers & Shock Accessories
ICON Vehicle Dynamics Tacoma IIC Install Kit for CDEV Shocks – 53502
Shock Absorbers & Shock AccessoriesICON Vehicle Dynamics Tacoma IIC Install Kit for CDEV Shocks – 53502
- Install kit for ICON IIC with CDEV shocks on the 2016-2023 Toyota Tacoma
- Application specific brackets, hardware and wire harnesses
- Bluetooth ICON App with Normal, Desert and Haul Drive Modes
- Direct fit
SKU: ICO53502 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics Rear EXP Coilover Shock Absorber for HOSS 2.0 Suspension – 48612
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics Rear EXP Coilover Shock Absorber for HOSS 2.0 Suspension – 48612
- Rear EXP coilover shock for the 2021 to 2026 Ford Bronco with HOSS 2.0 suspension
- Rear ride height from 0 to 3 inches over stock, reusing the factory coil spring
- 2.5-inch aluminum body with eyelet bottom mount and OEM top mount
- Part number ICO48612, sold individually with a quantity of 2 per vehicle
SKU: ICO48612 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics Rear EXP Coilover Shock Absorber for HOSS 1.0 Suspension – 48611
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics Rear EXP Coilover Shock Absorber for HOSS 1.0 Suspension – 48611
- Rear EXP coilover shock for the 2021 to 2026 Ford Bronco with HOSS 1.0 suspension
- Rear lift of 1.5 to 3 inches over stock, reusing the factory coil spring
- 2.5-inch aluminum body with eyelet bottom mount and OEM top mount
- Part number ICO48611, sold individually with a quantity of 2 per vehicle
SKU: ICO48611 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics Rear 2.0 VS IR Shock Absorber – 56516
- Rear 2.0 VS IR aluminum series shock for the 2022 Toyota Tundra
- Nitrogen charged monotube design with internal reservoir
- Compatible with 0 to 1 inch of rear lift
- Part number ICO56516, sold individually
SKU: ICO56516 -
Shock Absorbers & Shock Accessories
ICON Vehicle Dynamics IIC Install Kit for CDEV Shocks – 53504
- Intelligent Control (IIC) install kit for CDEV shocks on the 2010 to 2024 Toyota 4Runner
- G-force and gyroscope inputs, with CDEV valve control in under 40 milliseconds
- Bluetooth app with Normal, Desert and Haul drive modes and custom presets
- Part number ICO53504, with trip data recording
SKU: ICO53504
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.



