Overview
The Skyjacker Softride Nitro N8035 is a front gas-charged twin tube shock absorber for 2007–2018 Jeep Wrangler (JK) 2-door and 4-door models. It is a direct-fit front shock for vehicles with a 1 – 3.5 in. lift, and the Nitro design is built for heavy-duty off-road use.
The 150 PSI nitrogen charge and compression control help prevent air bubbles and reduce fade under hard driving. The damping runs a little stiff for most street use, so this shock suits trail driving better than daily commuting. Each unit has a white body with a red polyurethane boot.
Key features
- Multi-stage velocity sensitive valving
- Twin tube construction with an oversized piston head
- 150 PSI nitrogen gas pressurized body
- Internal rebound bumper
- 5/8 in. diameter hardened double chrome rod
- Urethane bushings and a red polyurethane boot
- Compression control that Skyjacker says reduces fade
Front shocks and steering feel
On a Wrangler JK, the front shocks help control wheel hop, body roll and steering wander over rough ground. A front unit that has lost damping lets the tires skip on washboard roads and can make the steering feel light at speed. Because the front end does a lot of the work on trails, a shock built for heavier use holds its feel longer.
Front and rear shocks work as a system, so replacing one end often shows how worn the other end is. When fitting new units, tighten the mounting hardware to the specified torque and recheck it after the first few drives. Inspect the boot for cracks, since dirt that reaches the rod causes seal leaks.
- Check steering play along with shock condition
- Recheck mounting hardware after the first drives
- Replace front shocks in matched pairs
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8035 |
| UPC | 80369619077 |
| Series | Nitro Series |
| Mounting location | Front |
| Body models | 2-door and 4-door |
| Gas charge | 150 PSI nitrogen |
| Valving | Multi-stage velocity sensitive |
| Construction | Twin tube, oversized piston head |
| Collapsed length | 13.54 in. |
| Extended length | 22.75 in. |
| Rod | 5/8 in. diameter, hardened double chrome |
| Bushings | Urethane |
| Boot | Red polyurethane |
| Color | White |
| Lift range | 1 – 3.5 in. |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) with Rubicon, Sahara, Sport, Sport S, 70th Anniversary and 75th Anniversary trims, plus the Unlimited versions of those trims and Unlimited X and X.
Wrangler TJ, LJ and JL models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber per unit, with its red polyurethane boot.
Not included: Check the package contents against your installation before starting.









