Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 481–492 of 3453 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Remote Reservoir Shock Absorber Set with CDCV – 57805CP
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Remote Reservoir Shock Absorber Set with CDCV – 57805CP
- Rear 2.5 Series remote reservoir shock with CDCV for 2005–2023 Toyota Tacoma
- External CDC valve with 10 damping levels
- Bump zone with about 20% extra damping force
- Monotube reservoir layout with gas charge
- Part number ICO57805CP
SKU: ICO57805CP -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Remote Reservoir Coilover Shock Absorber Set – 91811
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Remote Reservoir Coilover Shock Absorber Set – 91811
- Front 2.5 Series remote reservoir coilover set for 2015–2020 Ford F-150 4WD
- Adjustable lift from 0 to 3 inches
- Sport-tuned valving and a larger 2.5 inch shock body
- Pairs with ICON rear shocks for balanced control
- Part number ICO91811
SKU: ICO91811 -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Remote Reservoir Coil Over Shock Kit – 58760
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Remote Reservoir Coil Over Shock Kit – 58760
- Front 2.5 Series remote reservoir coilover for 2008–2021 Toyota Land Cruiser 200 Series
- 0 to 3 inch lift adjustability
- Larger 2.5 inch shock body with more piston area
- Vehicle-specific valving for a sport-tuned feel
- Part number ICO58760
SKU: ICO58760 -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set with CDCV – 87700CP
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set with CDCV – 87700CP
- Rear V.S. 2.5 Series piggyback reservoir shock set with CDCV for 2004–2015 Nissan Titan
- Adjustable CDC valve with 10 damping levels
- Bump zone with about 20% extra damping force
- Configured for each application in length and damping tune
- Part number ICO87700CP
SKU: ICO87700CP -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set with CDCV – 77700CP
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set with CDCV – 77700CP
- Rear V.S. 2.5 Series piggyback reservoir shock set with CDCV for 2007–2019 Chevrolet Silverado and GMC Sierra 1500
- External CDC valve with 10 levels of compression damping force
- Bump zone adds about 20% extra damping near full compression
- Rebuildable and revalveable
- Part number ICO77700CP
SKU: ICO77700CP -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set with CDCV – 37705CP
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set with CDCV – 37705CP
- Rear piggyback reservoir shock set with CDCV valve for 1999–2022 Ford F-250 and F-350 Super Duty
- Externally adjustable valve with 10 compression damping levels
- Bump zone with about 20% extra damping force
- Part number ICO37705CP
- Rebuildable and revalveable
SKU: ICO37705CP -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set with CDCV – 37701CP
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set with CDCV – 37701CP
- Rear piggyback reservoir shock set with CDCV valve for 1999–2022 Ford F-250 and F-350 Super Duty
- CDC valve with 10 compression damping levels
- Bump zone with about 20% extra damping force
- Billet aluminum manifold and internal reservoir
- Part number ICO37701CP
SKU: ICO37701CP -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set – 77725P
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Piggyback Reservoir Shock Absorber Set – 77725P
- Front piggyback reservoir shock set for 2001–2010 Chevrolet Silverado and GMC Sierra 2500 and 3500 trucks
- Bump zone with about 20% extra damping force
- Billet aluminum manifold design
- Configured for each application
- Part number ICO77725P
SKU: ICO77725P -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Piggyback Rear Shock Kit – 57720P
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Piggyback Rear Shock Kit – 57720P
- Rear V.S. 2.5 Series piggyback rear shock kit for 2007–2021 Toyota Tundra
- Billet manifold bump zone with about 20% extra damping force
- Rebuildable and revalveable
- Vehicle-specific length and damping tune
- Part number ICO57720P
SKU: ICO57720P -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Piggyback Front Shock Kit – 37705P
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Piggyback Front Shock Kit – 37705P
- Piggyback shock for 1999–2022 Ford F-250 and F-350 Super Duty, with mounting position to confirm before ordering
- Bump zone with about 20% extra damping force
- Billet aluminum manifold creates the bump zone
- Rebuildable and revalveable
- Part number ICO37705P
SKU: ICO37705P -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series Piggyback CDCV Shock Absorber Set – 57725CP
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series Piggyback CDCV Shock Absorber Set – 57725CP
- Rear 2.5 Series piggyback reservoir shock set for 2008–2011 and 2013–2021 Toyota Land Cruiser
- Hydraulic damping with gas charge
- Configured for the application in length and damping tune
- Rebuildable and revalveable
- Part number ICO57725CP
SKU: ICO57725CP -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.5 Series PBR Shock Absorber Set – 27725CP
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.5 Series PBR Shock Absorber Set – 27725CP
- Rear V.S. 2.5 Series PBR shock set for 2007–2018 Jeep Wrangler JK
- Externally adjustable CDC valve with 10 levels of compression damping
- Restricts oil flow into the reservoir to set damping force
- Rebuildable and revalveable
- Part number ICO27725CP
SKU: ICO27725CP
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.



