Overview
The Skyjacker Softride Nitro N8034 is a rear gas-charged shock absorber for the 2000–2005 Ford Excursion, in Eddie Bauer, Limited, XLS and XLT trims.
Part of Skyjacker’s Nitro Series, the N8034 uses 150 PSI nitrogen gas, twin tube construction and a bonded iron piston. Its chromed piston rod and red polyurethane bushings are paired with a red boot. The listed lift range is 0 to 4.5 in., so it covers Excursions from stock height up to that lift.
Key features
- Rear position, gas-charged design
- 150 PSI nitrogen gas pressure
- Twin tube construction
- Bonded iron piston and chromed piston rod
- Red polyurethane bushings and red boot
- The shock carries a limited lifetime warranty.
Rear shock load and lift
A full-size SUV carries heavy loads in the rear, including passengers, cargo and towed weight. The rear shock works with the springs to control body motion and keep the tires planted over uneven pavement. As lift increases, the shock travels through a longer arc, so the mounting points and bushings see more stress over time.
Rear shocks wear out faster on vehicles that carry heavy loads or tow often. Look for a bouncy rear end after a bump, oil on the body, or a knocking sound over ruts. Keep the boot clean, since grit trapped against the rod speeds up seal wear.
- Inspect mounting bushings at every oil change
- Keep the rod boot free of mud and grit
- Replace rear shocks in pairs for balanced control
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8034 |
| UPC | 803696149196 |
| Series | N8000 (Nitro Series) |
| Position | Rear |
| Gas pressure | 150 PSI nitrogen |
| Piston | Bonded iron |
| Piston rod | Chromed |
| Bushings | Red polyurethane |
| Boot | Red |
| w/0 – 4.5 in. Lift | w/0 – 4.5 in. Lift |
| Warranty | Limited lifetime |
| Sold as | Each |
Vehicle fitment
The manufacturer fitment list covers only the 2000–2005 Ford Excursion in Eddie Bauer, Limited, XLS and XLT trims.
Other Ford trucks, Super Duty models and Excursions after 2005 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check your Excursion’s lift height against the 0 to 4.5 in. range before fitting this rear shock, since it is made for that span only.
What’s included
One rear shock absorber with a red boot, sold as each.
Not included: shocks for other positions.









