Overview
The Skyjacker Softride Nitro N8032 is a front gas-charged shock absorber for 1967–1991 Chevrolet and GMC full-size trucks and Suburbans, including K10, K20, K30, V10, V20 and V30 models.
Skyjacker built the N8032 in its Nitro Series with 150 PSI nitrogen gas, twin tube construction and multi-stage velocity sensitive valving. It uses a bonded iron piston, a chromed piston rod and red polyurethane bushings, and it includes a red boot.
Key features
- Front position gas-charged design with 150 PSI nitrogen
- Multi-stage velocity sensitive valving and twin tube construction
- Bonded iron piston paired with a chromed piston rod
- 5/8 in. diameter hardened, double chrome rod
- Red polyurethane bushings and red boot
- The shock carries a limited lifetime warranty and comes in 15 other colors.
Front shock upkeep
A front shock works with the steering and the front springs to keep the tires in contact with the ground. On older trucks with worn ball joints and loose steering components, a weak shock can make the front end feel loose or wander on the highway. Twin tube designs handle heat better than single tube units, which helps on long grades and during repeated braking.
Front shocks are best replaced as a pair so both sides damp evenly. Inspect the bushings for cracking or flattening, since worn rubber lets the shock knock on every bump. A film of oil on the body or rod means the seal has started to leak and the shock needs replacement.
- Replace front shocks as a matched pair
- Check the bushings for cracks or flattening
- Look for oil on the body or rod
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8032 |
| UPC | 803696149042 |
| Series | N8000 (Nitro Series) |
| Position | Front |
| Gas pressure | 150 PSI nitrogen |
| Piston | Bonded iron |
| Piston rod | Chromed, 5/8 in. diameter, hardened double chrome |
| Bushings | Red polyurethane |
| Boot | Red |
| Valving | Multi-stage velocity sensitive |
| Lift height w/10 – 9 in. Lift. Confirm fit for your vehicle’s year, model and trim before ordering. | w/10 – 9 in. Lift |
| Other colors | 15 other colors available |
| Sold as | Each |
Vehicle fitment
The manufacturer fitment list covers Chevrolet and GMC full-size trucks from 1967 to 1991, including K10, K20 and K30 and V10, V20 and V30 Chevrolets, K15, K25, K35, C35, V1500, V2500 and V3500 GMCs, and Suburban versions of many of them, across Base, Custom, Scottsdale, Silverado and Sierra trims.
It fits 1967–1991 Chevrolet and GMC K and V series trucks and Suburbans, from K10 through V30 models. Later C/K trucks are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The listed lift height reads w/10 – 9 in. Lift, which is an unusual range, so check it against your own suspension height before fitting the front shock.
What’s included
One front shock absorber with a red boot and red polyurethane bushings, sold as each.
Not included: a second shock.








