Overview
The Skyjacker Softride Nitro N8028 is a rear gas-charged shock absorber for suspension lifts of 4 – 5 in. It fits the 1984–2001 Jeep Cherokee (XJ), 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler Unlimited (LJ).
Nitro Series shocks in this design are pressurized with 150 PSI nitrogen gas. It is a twin tube shock built for demanding trail use and is best suited to severe off-road work. Expect a firmer ride than street-oriented shocks, since it runs a little stiff for street driving.
Key features
- 150 PSI nitrogen gas pressurized body for gas-charged damping
- Multi-stage velocity sensitive valving
- Twin tube construction with an oversized piston head
- Internal rebound bumper and compression control, which Skyjacker says prevents air bubbles and reduces fade
- 5/8 in. hardened, double chrome rod with urethane bushings
- White body with a red polyurethane boot
Rear shock upkeep on lifted trucks
A rear shock controls how the axle moves once a suspension lift changes the geometry of the vehicle. Longer travel and a taller stance put more load on the damper, so a shock sized for the lift keeps the axle under control on rough trails and on pavement. Gas-charged designs resist foaming when they heat up, which helps the damping stay steady over a long descent.
When replacing rear shocks, replace both sides together so the damping matches left to right. Worn bushings and leaking bodies show up as a bouncy rear end, oil on the body, or clunks over bumps. Check the rubber boot for cracks, since grit that reaches the rod shortens seal life.
- Replace rear shocks in pairs for even damping
- Inspect bushings and eyelets for cracking
- Recheck mounting bolts after the first few trail runs
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8028 |
| UPC | 4364514879 |
| Product line | Softride Nitro Series |
| Position | Rear |
| Charge type | Gas charged |
| Gas pressure | 150 PSI nitrogen |
| Lift height | 4 – 5 in. lift (suspension lifts only) |
| Piston rod | 5/8 in. diameter, hardened, double chrome |
| Bushings | Urethane |
| Finish | White |
| Sold as | Individually |
Vehicle fitment
The manufacturer fitment list covers the 1984–2001 Jeep Cherokee (XJ) across Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, the 1997–2006 Jeep Wrangler (TJ) including Rubicon, Sahara, SE, Sport and X, and the 2004–2006 Jeep Wrangler Unlimited (LJ) in Unlimited and Unlimited Rubicon trims.
The list has no YJ, 2007–2018 JK or Grand Cherokee entries. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is made for suspension lifts only and will not raise the vehicle, so match it to a 4 – 5 in. lift. It is a rear position shock and should be fitted in that position only.
What’s included
One rear shock absorber with a red polyurethane boot.
Not included: a second shock; shocks are sold individually.









