Overview
The Skyjacker Softride Nitro N8037 is a rear shock absorber for 2007–2018 Jeep Wrangler (JK) vehicles, covering both 2-door and 4-door models. It is a direct-fit rear unit for a 2 – 3.5 in. lift, with a collapsed length of 15.05 in., an extended length of 25.35 in. and a 5.30 in. stroke.
The Nitro series is built for heavy-duty off-road work, and the ride is a little firm for most street driving. The shock uses a 150 PSI nitrogen charge, and its white body is finished with a red polyurethane boot.
Key features
- Oversized piston head on a twin tube body
- Multi-stage velocity sensitive valving
- 150 PSI nitrogen gas charge
- Internal rebound bumper
- 5/8 in. hardened double chrome piston rod
- Urethane bushings and a red polyurethane boot
- Compression control, which Skyjacker says reduces fade
Wrangler JK rear shock setup
On a Wrangler JK, rear shocks control axle movement as the body rolls and the tires drop into ruts. A well-damped rear end keeps the Jeep stable on steep off-camber sections and washboard roads. Nitrogen gas pressure helps keep damping consistent as the shock heats up during long trail days.
Choose a rear shock that fits your installed lift, since the 2 – 3.5 in. range assumes your suspension height falls inside it. Check the upper and lower mounts for wear before fitting, and confirm the bump stop and boot are intact. Rear shocks are often replaced in pairs so both sides control the axle equally.
- Measure the installed lift height
- Inspect upper and lower mounting hardware
- Check the red boot for tears
- Replace in pairs for even control
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8037 |
| UPC | 80369614937 |
| Series | Nitro Series |
| Mounting location | Rear |
| Body models | 2-door and 4-door |
| Gas charge | 150 PSI nitrogen |
| Valving | Multi-stage velocity sensitive |
| Construction | Twin tube, oversized piston head |
| Collapsed length | 15.05 in. |
| Extended length | 25.35 in. |
| Shock stroke | 5.30 in. |
| Rod | 5/8 in. diameter, hardened double chrome |
| Bushings | Urethane |
| Boot | Red polyurethane |
| Color | White |
| Lift range | 2 – 3.5 in. |
| Fitment type | Direct fit |
Vehicle fitment
Fits the 2007–2018 Jeep Wrangler (JK) in Rubicon, Sahara, Sport, Sport S, 70th Anniversary, 75th Anniversary and Unlimited trims, plus Unlimited X and X.
Wrangler TJ, LJ and JL models, and Grand Cherokee models, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock absorber per unit, finished with its red polyurethane boot.
Not included: Inventory any mounting hardware before you begin the installation.









