Overview
The Skyjacker Softride Nitro Shock Absorber N8043 is a rear gas-charged twin tube shock for 1973 to 1991 Chevrolet and GMC trucks, Suburbans, Blazers and Jimmy models, rated for a 0 – 2 in. lift. It is a direct fit for those vehicles and carries a limited lifetime warranty.
In a twin tube design, an outer tube surrounds the working cylinder and provides the oil a reserve chamber. This N8043 pairs that layout with a 150 PSI nitrogen gas charge, multi-stage velocity sensitive valving and a bonded iron piston. Fifteen other colors are available.
Key features
- Multi-stage velocity sensitive valving
- Twin tube construction
- 150 PSI nitrogen gas charge
- Bonded iron piston
- Chromed piston rod, 5/8 in. diameter, hardened and double chrome
- Red polyurethane bushings
- Red boot included
Signs the shock is worn
A rear shock works hard over rough ground, and the first signs of wear are usually behavioral. Body roll on corners, a bouncing feel after bumps, or a rear end that keeps bobbing after a stop all point to a damper that is losing control. Inspect the shock body for oil seepage around the rod seal, since a leak means the damping fluid is escaping and the unit will not control movement properly.
Gas-charged units also need care at the mounts. Worn bushings let the shock move off its intended path, and that wears the rod and the piston faster. When replacing a shock, check the eye bushings and the mounting hardware at the same time, and inspect the boot for tears that let grit reach the rod.
- Oil residue along the body or rod
- Cracked or torn boot
- Bouncing after bumps or rear sag
- Clunking at the mounts
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8043 |
| UPC | 803696149844 |
| Shock series | Nitro Series (N8000) |
| Position | Rear |
| Construction | Twin tube |
| Gas charge | 150 PSI nitrogen gas, gas charged |
| Piston | Bonded iron |
| Piston rod | Chromed, 5/8 in. diameter, hardened and double chrome |
| Bushings | Red polyurethane |
| Boot | Red |
| Lift range | 0 – 2 in. lift |
| Warranty | Limited lifetime |
| Unit | Each |
Vehicle fitment
Based on the manufacturer fitment list, the N8043 covers 1973 to 1991 Chevrolet and GMC vehicles: C10, C20 and C30 pickups, K10 and K20 pickups, R10 to R30 and V10 to V20 trucks, K5 Blazer, Suburban models, and the GMC Jimmy. Listed trims include Base, Custom Deluxe, Scottsdale, Silverado and Sierra Classic.
Models from other years, and Ford, Toyota or Ram vehicles, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match this rear shock to a lift between 0 and 2 in. before fitting, since the N8043 is labeled for that range only. Gas-charged shocks hold nitrogen under pressure, so keep the cylinder away from heat and do not puncture or cut the body.
What’s included
One N8043 rear shock absorber with its red boot and red polyurethane bushings, charged with 150 PSI nitrogen gas.









