Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 433–444 of 3453 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
King Shocks OEM Performance Series Rear 2.5 Piggyback Reservoir Shock Set – 25001-387
Shock Absorbers & Shock AccessoriesKing Shocks OEM Performance Series Rear 2.5 Piggyback Reservoir Shock Set – 25001-387
- Rear 2.5 piggyback reservoir shock set for the 2019 to 2021 Ford Ranger in Lariat, XL and XLT trims
- OEM top and bottom mounts on a 2.5-inch body
- Complete with hardware and instructions.
- Part number KST25001-387
SKU: KST25001-387 -
Shock Absorbers & Shock Accessories
King Shocks OEM Performance Series Rear 2.5 Adjustable Piggyback Reservoir Shock Absorber Set For 6 Inch Lift – 25001-385A
Shock Absorbers & Shock AccessoriesKing Shocks OEM Performance Series Rear 2.5 Adjustable Piggyback Reservoir Shock Absorber Set For 6 Inch Lift – 25001-385A
- Rear 2.5 adjustable piggyback reservoir shock set for a 6 inch lift, fitting the 2020 to 2026 Jeep Gladiator
- Eyelet top and bottom mounts on a 2.5-inch body
- Valve adjustment with hand tools and serviceable design.
- Part number KST25001-385A
SKU: KST25001-385A -
Shock Absorbers & Shock Accessories
King Shocks OEM Performance Series Rear 2.0 Internal Reservoir Shock for 6″ Lift – 20C001-385
Shock Absorbers & Shock AccessoriesKing Shocks OEM Performance Series Rear 2.0 Internal Reservoir Shock for 6″ Lift – 20C001-385
- OEM Performance Series shock for a 6 inch lift, fitting the 2020 to 2026 Jeep Gladiator
- 2.0 internal reservoir design with OEM top and bottom mounts
- Confirm front or rear position before ordering
- Part number KST20C001-385
SKU: KST20C001-385 -
Shock Absorbers & Shock Accessories
King Shocks OEM Performance Series Front 2.5 Remote Reservoir Shock Set, For 6 Inch Lift – 25001-377
Shock Absorbers & Shock AccessoriesKing Shocks OEM Performance Series Front 2.5 Remote Reservoir Shock Set, For 6 Inch Lift – 25001-377
- Front 2.5 remote reservoir shock set for a 6 inch lift, fitting the 2018 to 2019 Jeep Wrangler JL and 2020 to 2026 Gladiator
- Eyelet top and bottom mounts on 2.5-inch monotube reservoir bodies
- Serviced with simple hand tools and rebuildable.
- Part number KST25001-377
SKU: KST25001-377 -
Shock Absorbers & Shock Accessories
King Shocks OEM Performance Series Front 2.5 Remote Reservoir Shock Absorber Set – 25001-367
Shock Absorbers & Shock AccessoriesKing Shocks OEM Performance Series Front 2.5 Remote Reservoir Shock Absorber Set – 25001-367
- Front 2.5 remote reservoir shock absorber set with bar pin bottom mounts for the 2014 Ford F-150
- External reservoirs on 2.5-inch bodies for added fluid capacity
- Adjustable ride height and simple hand tool valve adjustment.
- Part number KST25001-367
SKU: KST25001-367 -
Shock Absorbers & Shock Accessories
King Shocks OEM Performance Series Front 2.5 Remote Reservoir Shock Absorber Set – 25001-355A
Shock Absorbers & Shock AccessoriesKing Shocks OEM Performance Series Front 2.5 Remote Reservoir Shock Absorber Set – 25001-355A
- Front 2.5 remote reservoir shock set with bar pin bottom mounts for the 2015 to 2020 Ford F-150
- 2.5-inch body with OEM top mount and external reservoir
- Up to 25 percent more front wheel travel.
- Part number KST25001-355A
SKU: KST25001-355A -
Shock Absorbers & Shock Accessories
King Shocks OEM Performance Series Front 2.5 Coilover Remote Reservoir Shock Set – 25001-337
Shock Absorbers & Shock AccessoriesKing Shocks OEM Performance Series Front 2.5 Coilover Remote Reservoir Shock Set – 25001-337
- Front 2.5 coilover remote reservoir shock set for the 2015 to 2021 Chevrolet Colorado and GMC Canyon
- All necessary hardware and detailed installation instructions included
- Valves adjustable with hand tools and serviceable for rebuilds
- Part number KST25001-337
SKU: KST25001-337 -
Shock Absorbers & Shock Accessories
King Shocks OEM Performance Front 2.5 Remote Reservoir Shock Set for 3 – 5 Inch Lift – 25001-351
Shock Absorbers & Shock AccessoriesKing Shocks OEM Performance Front 2.5 Remote Reservoir Shock Set for 3 – 5 Inch Lift – 25001-351
- Front 2.5 remote reservoir shock set for 3 to 5 inch lifts, fitting the 1990 to 1997 Toyota Land Cruiser Base
- Bolt-on installation with no cutting or welding
- Adjustable front ride height and up to 25 percent more wheel travel
- Part number KST25001-351
SKU: KST25001-351 -
Shock Absorbers & Shock Accessories
King Shocks 2.5 OEM Performance Series Remote Reservoir Coilover Front Shock Absorbers with Adjuster – 25001-119A
Shock Absorbers & Shock AccessoriesKing Shocks 2.5 OEM Performance Series Remote Reservoir Coilover Front Shock Absorbers with Adjuster – 25001-119A
- Front remote reservoir coilover shock with adjuster from the King 2.5 OEM Performance Series
- Fits 2005 to 2021 Toyota Tacoma, including TRD Pro and Trail trims
- Gas charged coilover, direct fit
- Part number KST25001-119A
SKU: KST25001-119A -
Shock Absorbers & Shock Accessories
King Shocks 2.5 OEM Performance Series Remote Reservoir Coilover Front Shock Absorbers – 25001-119
Shock Absorbers & Shock AccessoriesKing Shocks 2.5 OEM Performance Series Remote Reservoir Coilover Front Shock Absorbers – 25001-119
- Front remote reservoir coilover from the King 2.5 OEM Performance Series
- 2.5-inch shock body with external reservoir and eyelet bottom mount
- Fits 2005 to 2019 Toyota Tacoma, with up to 25 percent more wheel travel
- Part number KST25001-119
SKU: KST25001-119 -
Shock Absorbers & Shock Accessories
King Shocks 2.5 OEM Performance Series – Rear – Remote Reservoir Shock Absorber for 3 – 4″ Lifts – 25001-312
Shock Absorbers & Shock AccessoriesKing Shocks 2.5 OEM Performance Series – Rear – Remote Reservoir Shock Absorber for 3 – 4″ Lifts – 25001-312
- Rear remote reservoir shock from the King 2.5 OEM Performance Series, for 3 to 4 inch lifts
- Fits the 1984 to 2001 Jeep Cherokee XJ
- Custom tuned with bolt-on installation at stock height or with custom kits
- Part number KST25001-312
SKU: KST25001-312 -
Shock Absorbers & Shock Accessories
King OEM Performance Series JL/JT 2.0 Front Internal Reservoir Shock – 20C001-375
Shock Absorbers & Shock AccessoriesKing OEM Performance Series JL/JT 2.0 Front Internal Reservoir Shock – 20C001-375
- Front 2.0 Performance Series monotube shock for 2018 to 2026 Jeep Wrangler JL and 2020 to 2026 Gladiator
- OEM top and bottom mounts on a 2.0-inch body
- Gas charged construction
- Part number KST20C001-375
SKU: KST20C001-375
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.



