Overview
The Skyjacker Softride Nitro Shock Absorber N8048 is a rear gas-charged twin tube shock for 2000 to 2006 Toyota Tundra and 2005 to 2018 Toyota Tacoma models. Skyjacker rates it for a 0 – 1 in. lift and marks it as a direct fit.
Inside its twin tube body, the N8048 uses multi-stage velocity sensitive valving, a bonded iron piston and a chromed rod. The 150 PSI nitrogen charge is paired with red polyurethane bushings, and a red boot is included. The shock carries a limited lifetime warranty.
Key features
- Multi-stage velocity sensitive valving
- Twin tube construction
- 150 PSI nitrogen gas charge
- Bonded iron piston
- Chromed piston rod, 5/8 in. diameter, hardened and double chrome
- Red polyurethane bushings and red boot
- Rated for 0 – 1 in. lift
Choosing a lift height
Shock length and damping need to match the height of the vehicle. A rear lift changes the angle of the shock and how far it travels, so a shock sized for a stock ride can run out of travel on a lifted truck. Choose a shock whose rated lift range covers the lift already installed, rather than planning around a future change.
On a Tacoma or Tundra, rear shocks often work alongside coil springs, bump stops and suspension bushings. Worn bump stops or sagging springs change how the shock loads, so inspect them when replacing the shock. Keeping the rear end level helps the damper control movement on both pavement and dirt.
- Match the shock to your installed rear lift
- Check bump stops for cracks
- Inspect spring height and sag
- Replace worn eye bushings at the same time
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8048 |
| UPC | 803696150208 |
| Shock series | Nitro Series (N8000) |
| Position | Rear |
| Construction | Twin tube |
| Gas charge | 150 PSI nitrogen gas, gas charged |
| Piston | Bonded iron |
| Piston rod | Chromed, 5/8 in. diameter, hardened and double chrome |
| Bushings | Red polyurethane |
| Boot | Red |
| Lift range | 0 – 1 in. lift |
| Warranty | Limited lifetime |
| Unit | Each |
Vehicle fitment
Based on the manufacturer fitment list, the N8048 covers the 2005 to 2018 Toyota Tacoma in Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims, and the 2000 to 2006 Toyota Tundra in Base, Limited and SR5 trims.
Tacoma models from before 2005 or from 2019 on, and Tundra models outside 2000 to 2006, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rated lift range is 0 – 1 in., so a truck with more rear lift than that falls outside the stated range. Because the nitrogen charge is under pressure, the body should never be heated, cut or punctured.
What’s included
One N8048 rear shock absorber with a red boot and red polyurethane bushings.









