Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 2701–2712 of 3453 resultsSorted by popularity
-
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-188363
- Front reservoir shock for 1999–2004 Ford F-250 and F-350 Super Duty, per the listed fitment
- Collapsed length 15.96 in. (405.5 mm), extended length 26.99 in. (685.5 mm)
- 46mm monotube, gas charged body with remote reservoir
- Designed for a 4 – 6 in. lift
- Zinc plated finish, Bilstein part number 25-188363
SKU: BIL25-188363 -
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-187885
- 5165 Series reservoir shock, part number 25-187885
- Described by Bilstein as universal fit for custom lifted trucks and SUVs
- 5/8 in eye mounts, 14mm shaft, 7.42 in travel
- Compression 700, rebound 2550
- Includes 1/2 in sleeves and a reservoir mounting kit
SKU: BIL25-187885 -
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-187878
- 5165 Series reservoir shock, part number 25-187878
- Described by Bilstein as universal fit for custom lifted trucks and SUVs
- 5/8 in eye mounts, 14mm shaft, 6.24 in travel
- Compression 840, rebound 3695
- Includes 1/2 in sleeves and a reservoir mounting kit
SKU: BIL25-187878 -
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-187861
- Bilstein 25-187861, 5165 Series reservoir shock for custom lifted trucks and SUVs
- Gas charged monotube with digressive valving
- Remote reservoir and floating dividing piston for added shaft movement
- Universal Fit; no specific vehicle named
SKU: BIL25-187861 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187816
- Rear 5160 Series reservoir shock, part number 25-187816
- 16mm eye lower mount, bar mount upper
- Travel 10.05 in; collapsed 14.87 in; extended 24.92 in
- Lift range 4 in; reservoir mount kit included
- Confirm fit for your vehicle before ordering.
SKU: BIL25-187816 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187809
- Front 5160 Series reservoir shock, part number 25-187809
- Travel 11.95 in; collapsed 16.44 in; extended 28.39 in
- Bar mount lower, stem upper, 14mm shaft
- Lift range 5 – 6 in; Direct Fit label
- Confirm fit for your vehicle before ordering.
SKU: BIL25-187809 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187793
- Fits 2004–2006 Jeep Wrangler LJ and 1997–2006 Wrangler TJ
- Rear 5160 Series reservoir shock, part number 25-187793
- Bar mounts at both ends, 14mm shaft
- Travel 10.05 in; lift range 5 – 5.5 in
- Upper mount and reservoir mount included
SKU: BIL25-187793 -
Shock Absorbers
Bilstein 5160 Series Reservoir Shock Absorber – 25-187779
- Fits 2005–2016 Ford F-250 and F-350 Super Duty per the manufacturer fitment list
- Front 5160 Series reservoir shock, part number 25-187779
- Mono tube design, 46mm ID smooth body, 14mm shaft
- Travel 8.76 in; collapsed 13.58 in; extended 22.34 in
- Includes upper mount, brake line relocation and reservoir frame mount kits
SKU: BIL25-187779 -
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-187762
- 5165 Series Bilstein reservoir shock, part number 25-187762, Universal Fit
- Remote reservoir adds oil capacity for heat dissipation and damping sensitivity
- Triple-C Technology finish with easy care
- Comes with a reservoir mounting kit plus detailed instructions
SKU: BIL25-187762 -
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-187755
- Bilstein 25-187755 reservoir shock from the 5165 Series, listed Universal Fit
- Gas-charged monotube with a remote reservoir for extra shock oil
- Digressive valving and a floating piston housed in the reservoir for wheel travel
- Reservoir mounting hardware and instructions are part of the package
SKU: BIL25-187755 -
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-187748
- Universal Fit Bilstein 5165 Series reservoir shock for custom lifted trucks and SUVs
- Part number 25-187748 and UPC 651860649696
- Gas-charged monotube with a remote reservoir and floating dividing piston
- Comes with a reservoir mounting kit and detailed instructions
SKU: BIL25-187748 -
Shock Absorbers
Bilstein 5165 Series Reservoir Shock Absorber – 25-187731
- Bilstein 5165 Series reservoir shock, part number 25-187731
- Gas-charged monotube with floating piston inside the reservoir
- Universal fit design, not tied to one vehicle.
- Includes reservoir mounting kit and detailed instructions
SKU: BIL25-187731
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.















