Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 1957–1968 of 3453 resultsSorted by popularity
-
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7299
- Fabtech FTS7299 rear performance twin tube shock absorber
- Fits 1988–2017 Chevrolet, GMC, Ford, Dodge, Nissan and Ram trucks and SUVs
- Collapsed length 25.95 in., extended length 15.42 in., travel length 10.53 in.
- Lower and upper mounts are both EB1
- High flow 9 stage valving with closed cell foam insert
- Built for a 4 in. lift
SKU: FABFTS7299 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7267
- Fabtech FTS7267 Performance Twin Tube Shock Absorber
- EB2 lower and upper mounts, no reservoir
- Collapsed 25.2 in, extended 15.47 in, travel 9.73 in
- 2.38 inch hydraulic body with 9-stage high flow valving
- Fitment not listed; check Fabtech specifications
SKU: FABFTS7267 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7266
- Rear performance twin tube shock, part number FTS7266
- Built for a 3.5 – 6 in. lift range; hydraulic with no reservoir
- Collapsed length 32.95 in., extended length 18.92 in., travel 14.03 in.
- EB1 lower and upper mounts; 2.38 inch diameter body
- Vehicle fit not confirmed; confirm before ordering
SKU: FABFTS7266 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7265
- Front performance twin tube shock, part number FTS7265
- Built for a 3.5 – 5.5 in. lift range; hydraulic with no reservoir
- Collapsed length 25.2 in., extended length 15.17 in., travel 10.03 in.
- EB1 lower and upper mounts; 2.38 inch diameter body
- Confirm vehicle fit before ordering
SKU: FABFTS7265 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7240
- Fits 1999–2014 Chevrolet Silverado 1500 and GMC Sierra 1500, 2002–2008 Dodge Ram 1500, and 2016–2017 Nissan Titan XD and 2017 Nissan Titan
- Rear Fabtech Performance twin tube shock, part number FTS7240
- Collapsed length 29.74 in., extended length 17.61 in., travel 12.13 in.
- Built for a w/6 in. lift; hydraulic with no reservoir and EB2 mounts at both ends
- High flow 9 stage valving with a closed cell foam insert
SKU: FABFTS7240 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7238
- Fabtech FTS7238 rear performance twin tube shock absorber
- Fits 1997–2003 Ford F-150 and 1997–1999 Ford F-250 trucks
- Extended length 16.89 in., collapsed length 29.17 in., travel length 12.28 in.
- High flow 9 stage valving with closed cell foam insert
- 2.38 inch twin tube hydraulic body and 9/16 inch chrome hardened piston rod
- Lower mount S1, upper mount EB1, built for a 6 – 7 in. lift
SKU: FABFTS7238 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7237
- Front position, fits 1994–2001 Dodge Ram 1500 and 1994–2013 Ram 2500 and 3500
- Also fits 2010–2017 Toyota 4Runner and 2007–2010 Toyota FJ Cruiser
- Set up for a 4.5 in. lift
- Collapsed 26.05 in., extended 15.4 in., travel 10.65 in.
- Part number FTS7237, UPC 674866000094
SKU: FABFTS7237 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7236
- Front position, set up for a 3 in. lift
- No vehicles are named for this shock, so fitment is not confirmed
- Collapsed 24.8 in., extended 14.64 in., travel 10.16 in.
- Hydraulic twin tube, 2.38 inch body, high flow 9-stage valving
- Part number FTS7236, UPC 4364569662
SKU: FABFTS7236 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7232
- Rear position, fits 2004–2008 Chevrolet Colorado and GMC Canyon
- Also fits 2000–2002 Nissan Frontier and Nissan Xterra
- Set up for a 3 – 3.5 in. lift
- Collapsed 23.95 in., extended 14.42 in., travel 9.53 in.
- Part number FTS7232, UPC 674866006966
SKU: FABFTS7232 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7231
- Fits 1993–1998 Jeep Grand Cherokee (ZJ), 1984–1995 Toyota Pickup and 1998–2004 Toyota Tacoma
- Front position, set up for a 7 in. lift
- Collapsed 22.83 in., extended 13.92 in., travel 8.91 in.
- Hydraulic twin tube, 2.38 inch body, 9-stage valving
- Part number FTS7231, UPC 674866000070
SKU: FABFTS7231 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7194
- Rear position, fits 2004–2006 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks
- Set up for a 7 in. lift
- Collapsed 27.83 in., extended 16.3 in., travel 11.53 in.
- Both mounts coded EB1, hydraulic twin tube, no reservoir
- Part number FTS7194, UPC 67486601569
SKU: FABFTS7194 -
Shock Absorbers
Fabtech Performance Twin Tube Shock Absorber – FTS7192
- Fits Chevrolet Silverado and GMC Sierra 2500 and 3500 trucks from 2001 to 2008
- Also fits Ford F-250 and F-350 Super Duty trucks from 2005 to 2013
- Front position, set up for a 2 in. lift
- Collapsed 23.69 in., extended 14.16 in., travel 9.53 in.
- Part number FTS7192, UPC 674866007819
SKU: FABFTS7192
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.




