Overview
The Fabtech FTS7265 is a front performance twin tube shock absorber built for a 3.5 – 5.5 in. lift range. No vehicle, year, model or chassis code is confirmed for it, so confirm your truck’s fit before ordering.
The hydraulic body measures 2.38 inch in diameter and carries a 9/16 inch chrome hardened piston rod and a 1 3/8 inch OD piston. The high flow 9 stage valving and closed cell foam insert are designed to reduce shock fade at high speeds.
Key features
- Front position performance shock
- Hydraulic twin tube body with a 2.38 inch diameter
- High flow 9 stage valving for damping
- Closed cell foam insert
- 9/16 inch chrome hardened piston rod
- White powdercoat finish with blue Fabtech logo
Front shock selection by lift
Front shock selection depends on how far the front suspension has been raised and how much droop the truck needs. A shock with too little extension can bottom out when the front axle drops on a trail, and one with too much can strain its mounts at rest. Measuring the current ride height and comparing it with the lift range is the first step.
Pair front shocks with the rest of the steering and suspension. Tie rod ends, sway bar links and bushings often show wear at the same time as the shocks, and replacing them together keeps the steering geometry stable. Support the axle on stands while the old shock comes out, and tighten the mounts only after the truck is back at ride height.
- Measure ride height before comparing lift range
- Inspect tie rod ends and sway bar links
- Tighten mounts at ride height
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7265 |
| UPC | 674866000117 |
| Shock series | Performance Shock |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/3.5 – 5.5 in. lift |
| Collapsed length | 25.2 in. |
| Extended length | 15.17 in. |
| Travel length | 10.03 in. |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Reservoir | No |
| Shock body | 2.38 inch diameter twin tube hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
| Hydraulic / gas charged | Hydraulic |
Vehicle fitment
No vehicle fit is confirmed for the FTS7265. Confirm your year, model and trim, and check the front application on your truck before ordering.
The stated lift range is 3.5 – 5.5 in. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare your suspension height with the stated 3.5 – 5.5 in. lift range before fitting. The front axle should be supported on stands while the old shock comes out.
What’s included
Check the package contents against your installation before starting, including any hardware your mounts need.




















