Overview
The Fabtech FTS7232 is a rear Performance Twin Tube Shock Absorber for 2004–2008 Chevrolet Colorado and GMC Canyon trucks, and for 2000–2002 Nissan Frontier and Nissan Xterra models. It is a hydraulic twin tube shock with a 2 inch body, a 9/16 inch chrome hardened piston rod and 9-stage valving, set up for a 3 – 3.5 in. lift.
Fabtech builds the Performance line to match its suspension systems for ride control. The 9-stage valving and closed cell foam insert keep damping steady over rough use. Collapsed length is 23.95 in., extended 14.42 in. and travel 9.53 in., so compare those with the shock being replaced.
Key features
- Rear position, set up for a 3 – 3.5 in. lift
- Hydraulic twin tube, 2 inch diameter body
- High flow 9-stage valving
- Closed cell foam insert
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- Powder-coated white, blue Fabtech logo
Rear shock basics
A rear shock carries much of the load on a pickup or SUV, controlling axle movement over bumps and under braking. On trucks that sit higher, the shock works through a longer stroke, so its length and mount geometry have to suit the lift and the leaf or coil springs in place.
Worn rear shocks often show up as rear end bounce after a rough section, a bottoming sound over larger bumps, or fluid seeping down the body. When replacing them, check the upper and lower mounts, since a mismatched eye can change how the shock loads under compression.
- Check mounts and bushings when swapping
- Inspect the body for fluid or dents
- Keep the rear shocks matched left to right
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7232 |
| UPC | 674866006966 |
| Shock series | Performance Shock |
| Position | Rear |
| Shock body | 2 inch diameter, twin tube |
| Type | Hydraulic |
| Reservoir | No |
| Collapsed length | 23.95 in. |
| Extended length | 14.42 in. |
| Travel length | 9.53 in. |
| Lower mount | BP7 |
| Upper mount | ES171 |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Insert | Closed cell foam |
| Valving | High flow 9 stage |
| Finish | White powdercoat with blue Fabtech logo |
| Lift setting | 3 – 3.5 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers 2004–2008 Chevrolet Colorado and GMC Canyon trucks with the trims shown, plus 2000–2002 Nissan Frontier (SC, SE, XE) and Nissan Xterra (SE, XE) models.
Colorado and Canyon models from later years, and Frontier or Xterra models from later years, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lower mount code BP7 and upper mount code ES171 are different, so check that the ends on your current shock match those codes before buying. The lift setting is 3 – 3.5 in., so measure your ride height first.
What’s included
One rear unit with a white powdercoat finish and a blue Fabtech logo.
Not included: No hardware, brackets or bushings come with this rear unit. Confirm your mounts before you start.




















