Overview
The Fabtech FTS7267 is a Performance Twin Tube shock absorber built with a 2.38 inch hydraulic body, a 9/16 inch chrome hardened piston rod and high flow 9-stage valving. It has EB2 mounts at both the lower and upper end and no reservoir.
Its stated collapsed length is 25.2 inches, extended length 15.47 inches and travel 9.73 inches. Fabtech designed the line to work with its suspension systems, and the closed cell foam insert is meant to reduce shock fade at high speeds. No vehicle is named for this part.
Key features
- EB2 lower and upper mounts
- High flow 9-stage valving
- Closed cell foam insert meant to reduce shock fade at high speeds
- 2.38 inch diameter twin tube hydraulic body
- 9/16 inch chrome hardened piston rod with 1 3/8 inch OD piston
- White powdercoat finish with a blue Fabtech logo
Long travel and EB2 mounts
Shocks with longer travel are usually chosen for trucks and off-road rigs that see large suspension movement. Long stroke units carry more fluid and gas pressure through their range, so keeping the seals and rod clean is more important than on a short shock. Heat also builds faster on long descents, which is why the shock body should have clear airflow.
EB2 mounts are a common eye style, and matching both ends with the same style keeps the shock working along its intended axis. Bushing wear on either end shows up as clunks or uneven damping, so inspect both when the shock is changed. Pairing a new shock with worn control arm bushings can lead to uneven wear on the new unit.
- Keep the shaft and seal free of grit
- Check airflow around the shock body on long descents
- Inspect both mount ends for bushing wear
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7267 |
| UPC | 674866007833 |
| Type | Performance Twin Tube shock absorber, hydraulic |
| Body diameter | 2.38 inch twin tube |
| Collapsed length | 25.2 in |
| Extended length | 15.47 in |
| Travel length | 9.73 in |
| Lower mount | EB2 |
| Upper mount | EB2 |
| Reservoir | No |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
Vehicle fitment
Look over the year, model and trim before placing an order. Compare the EB2 mount ends and 9.73 inch travel with the shock you are replacing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One Fabtech Performance Twin Tube shock absorber, part FTS7267. Bushings and mounting hardware should be checked before installation.

















