Overview
The Fabtech FTS7236 is a front Performance Twin Tube Shock Absorber with a 2.38 inch body, a 9/16 inch chrome hardened piston rod and 9-stage valving, set up for a 3 in. lift. No vehicles are named for it, so fitment is not confirmed.
The Performance line is matched to suspension systems for ride control. The high velocity 9-stage valving and closed cell foam insert help keep damping consistent. Collapsed length is 24.8 in., extended 14.64 in. and travel 10.16 in.
Key features
- Front position, set up for a 3 in. lift
- Hydraulic twin tube, 2.38 inch diameter body
- High flow 9-stage valving
- Closed cell foam insert
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- White powdercoat finish with a blue Fabtech logo
Matching mounts and lengths
A front shock controls suspension movement at the steering axle, where weight shifts during braking and cornering. A performance hydraulic design keeps the damping steady, which helps the steering feel precise on rough roads. Shock setup matters because the springs, lift height and tire size all influence how the shock responds.
Measuring is the most reliable way to choose a replacement. Record the collapsed length, extended length and travel of your current shock, then compare them with the new unit. Check the upper and lower mount styles too, since mismatched ends are a common cause of wasted parts.
Front shocks wear through leaks, worn bushings and loss of damping. Inspect the body for oil, feel for play at the mounts, and listen for knocking over bumps. Front shocks are commonly replaced in pairs so the steering feel stays even. Keep fasteners clean and tighten them to the fitting instructions for your truck.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7236 |
| UPC | 4364569662 |
| Shock series | Performance Shock |
| Position | Front |
| Shock body | 2.38 inch diameter, twin tube |
| Type | Hydraulic |
| Reservoir | No |
| Collapsed length | 24.8 in. |
| Extended length | 14.64 in. |
| Travel length | 10.16 in. |
| Lower mount | S1 |
| Upper mount | EB1 |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Insert | Closed cell foam |
| Valving | High flow 9 stage |
| Finish | White powdercoat with blue Fabtech logo |
| Lift setting | 3 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
Confirm your year, model and trim against this shock before ordering, since the front position and lift setup should match your truck.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lower mount code S1 and upper mount code EB1 are given, so compare the ends on your current shock with those codes before buying.
What’s included
It is one front shock absorber.
Not included: Plan for brackets, bushings and bolts separately if your truck needs them.



















