Overview
The Fabtech FTS7238 is a rear performance twin tube shock absorber for the 1997–2003 Ford F-150, the 2004 Ford F-150 Heritage (XL, XLT) and the 1997–1999 Ford F-250 (Base, Lariat, XL, XLT). It is hydraulic and built for a 6 – 7 in. lift, with a 16.89 in. extended length and 12.28 in. of travel.
Rear shocks control how quickly the axle rises and falls over bumps. This one pairs a 2.38 inch diameter twin tube body with high flow 9 stage valving and a closed cell foam insert, which dampens motion and limits shock fade at high speeds. The 9/16 inch chrome hardened piston rod and 1 3/8 inch OD piston carry that damping through the stroke. It is a direct fit for the trucks named below.
Key features
- High flow 9 stage valving for damping control
- Closed cell foam insert inside the twin tube body
- 2.38 inch diameter twin tube hydraulic shock body
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- White powdercoat finish with a blue Fabtech logo
- Rear position with S1 lower mount and EB1 upper mount
Rear shock upkeep on a half-ton
Rear shocks on a half-ton truck take the weight of the bed and load, and they work hardest when the truck is heavy or towing. A twin tube hydraulic shock uses fluid pushed through valving on each stroke, so a worn piston or valve can leave the rear end bouncing after dips. Keep the shock body clean and check it after rough trips, especially with added weight.
Rear shock mounts and bushings wear as a truck ages, and loose mounts can make a good shock feel worn. Check the upper and lower eyes for cracks, then tighten the fasteners to the vehicle’s specified torque. Replace shocks in pairs on the same axle so the rear ride stays even under load, and keep the rear springs and bump stops in good condition too.
- Oil on the shock body
- Bounce that continues after a dip
- Cracked or loose mount bushings
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7238 |
| UPC | 674866000100 |
| Position | Rear |
| Shock series | Performance shock |
| Collapsed length | 29.17 in. |
| Extended length | 16.89 in. |
| Travel length | 12.28 in. |
| Lower mount | S1 |
| Upper mount | EB1 |
| Reservoir | No |
| Shock body | 2.38 inch diameter twin tube |
| Hydraulic / gas charged | Hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
| Lift height | Built for a 6 – 7 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1997–2003 Ford F-150 (Base, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT), the 2004 Ford F-150 Heritage (XL, XLT) and the 1997–1999 Ford F-250 (Base, Lariat, XL, XLT).
The list does not cover 2004 F-150 trims other than Heritage, F-150 models from 2005 on, or the later F-250 Super Duty trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the S1 lower mount and EB1 upper mount match your existing hardware before you start, and confirm that your suspension sits in the 6 – 7 in. lift range. Support the truck on stands and keep hands clear when a loaded shock is released.
What’s included
One Fabtech FTS7238 performance twin tube shock absorber. Check mounting hardware and bushings against your installation before starting.








