Overview
The Fabtech FTS7299 is a rear performance twin tube shock absorber built for a 4 in. lift on a wide range of Chevrolet, GMC, Ford, Dodge, Nissan and Ram trucks and SUVs. The fitment covers 1988 to 2017 models, including the Chevrolet Blazer, Tahoe and K1500, the GMC K1500 and Sierra 2500 HD, and the Ford Expedition and Excursion.
This shock has a 2.38 inch diameter twin tube hydraulic body, 25.95 in. collapsed length and 15.42 in. extended length. Its 10.53 in. of travel is paired with high flow 9 stage valving and a closed cell foam insert, which Fabtech describes as controlling damping and reducing shock fade. Both mounts are EB1, and the piston rod is 9/16 inch chrome hardened.
Key features
- High flow 9 stage valving for controlled damping
- Closed cell foam insert inside the twin tube body
- 2.38 inch diameter twin tube hydraulic body
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- White powdercoat finish with a blue Fabtech logo
Matching the shock to your truck
Rear shocks used across wide-range fitment often cover different generations, and mounts and lengths can differ even when the model name matches. Measure your current shock’s collapsed and extended lengths, then compare those against the specifications before buying. A lift changes the working length as well, so a shock built for a 4 in. lift should be checked against your suspension height.
Twin tube shocks with closed cell foam inserts are common in rear applications where a steady ride matters, and the foam helps limit aeration of the fluid during repeated strokes. Inspect the bushings and bolts when the shock is removed, and tighten the fasteners after a short drive. Keep the rear bump stops in good shape, since they work alongside the shock to control the end of travel.
- Collapsed and extended length
- Lift height and ride height
- Mount style at both ends
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7299 |
| UPC | 674866000131 |
| Position | Rear |
| Shock series | Performance shock |
| Collapsed length | 25.95 in. |
| Extended length | 15.42 in. |
| Travel length | 10.53 in. |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Reservoir | No |
| Shock body | 2.38 inch diameter twin tube |
| Hydraulic / gas charged | Hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
| Lift height | Built for a 4 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1992–1994 Chevrolet Blazer, the 1988–1998 Chevrolet K1500, the 1992–1997 Chevrolet K1500 Suburban, the 1999–2006 Chevrolet Silverado 1500, the 2011–2017 Chevrolet Silverado 2500 HD, the 1995–1999 Chevrolet Tahoe, the 1995–2001 Dodge Ram 1500, the 2000–2005 Ford Excursion, the 1997–2002 Ford Expedition, the 1999 and 2001–2012 Ford F-250 and F-350 Super Duty, the 1988–1998 GMC K1500, the 1992–1999 GMC K1500 Suburban, the 1999–2006 GMC Sierra 1500, the 2011–2017 GMC Sierra 2500 HD, the 2006–2011 Nissan Frontier and the 2013–2014 Ram 3500, each in the trims shown.
Models outside these year ranges are not covered, including the 2007 and later Silverado 1500 and Sierra 1500, and the Dodge Ram 2500 and 3500 other than the 2013–2014 Ram 3500. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the EB1 mounts on your truck match this shock, and check that your lift is close to the listed 4 in. setting. Since the fitment spans many generations, a parts counter can check the mount style for an older model before you order.
What’s included
One Fabtech FTS7299 performance twin tube shock absorber. Check mounting hardware against your installation before starting.



















