Overview
The Fabtech FTS7266 is a rear position performance twin tube shock absorber built for a 3.5 – 6 in. lift range. No vehicle is confirmed for it, so its year, model and trim fit need checking before ordering.
Its travel length is 14.03 in., with a 32.95 in. collapsed length and 18.92 in. extended length. The body is a 2.38 inch diameter hydraulic twin tube, fitted with a 9/16 inch chrome hardened piston rod, a 1 3/8 inch OD piston, high flow 9 stage valving and a closed cell foam insert.
Key features
- Rear position performance shock
- Built for a 3.5 – 6 in. lift range
- Twin tube hydraulic body, 2.38 inch diameter
- High flow 9 stage valving with closed cell foam insert
- 9/16 inch chrome hardened piston rod
- Hydraulic design with no reservoir
Rear shock length and travel
Shock length and travel decide whether a rear unit can cycle through the full suspension range without bottoming or hitting the stops. Longer travel suits trucks that have been raised or that run on uneven ground, while a shorter unit can suit a near stock height. Measure the shock eye to eye at both extremes before choosing.
Rear shocks also work with the springs and axle. When the springs are replaced or the ride height changes, the shock may need to be reviewed. Inspect the bump stops and rubber mounts while the shock is off, and replace any that are cracked or flattened.
- Measure eye to eye at full extension and compression
- Inspect bump stops and rubber mounts
- Review shock length after any spring change
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7266 |
| UPC | 674866000124 |
| Shock series | Performance Shock |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | w/3.5 – 6 in. lift |
| Collapsed length | 32.95 in. |
| Extended length | 18.92 in. |
| Travel length | 14.03 in. |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Reservoir | No |
| Shock body | 2.38 inch diameter twin tube hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
| Hydraulic / gas charged | Hydraulic |
Vehicle fitment
No vehicle fit is confirmed for the FTS7266. Confirm the rear application for your truck’s year, model and trim before ordering.
Compare length and mount type with your current shock before buying a replacement. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your current shock’s collapsed and extended lengths, then compare them with 32.95 in. and 18.92 in. before fitting. Shocks are under load when the suspension compresses, so support the vehicle on stands first.
What’s included
Check the package contents before fitting, including any mounting hardware your truck requires.





