Overview
The Fabtech FTS7194 is a rear Performance Twin Tube Shock Absorber that fits 2004–2006 Chevrolet Silverado 1500 (LS, LT) and GMC Sierra 1500 (SL, SLE, SLT) trucks. It is a hydraulic twin tube unit with a 2.38 inch body, a 9/16 inch chrome hardened piston rod and 9-stage valving, set for a 7 inch lift.
Fabtech positions the Performance line as a shock matched to its suspension systems, with damping support from the high velocity 9-stage valving. The closed cell foam insert is included in the design to keep damping consistent. The lengths here are collapsed 27.83 in., extended 16.3 in. and travel 11.53 in., so measure before choosing it.
Key features
- Rear position, set up for a 7 in. lift
- Twin tube hydraulic body, 2.38 inch diameter
- High flow 9-stage valving
- Closed cell foam insert
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- Powdercoated white body with a blue Fabtech logo
Rear shocks on half-ton pickups
Rear shocks on half-ton pickups handle the load in the bed and the way the rear axle moves over bumps. Good rear damping keeps the tires in contact with the road and limits sway when the truck is loaded. A worn rear shock often shows up as a bouncy ride or a rear end that rebounds more than it should.
When replacing a rear shock, measure the old unit and compare its lengths with the figures here. Inspect the mounts and bushings for wear, since eye-style ends can loosen over time. Rear shocks are often replaced in pairs, and many owners also check the leaf spring and bump stop condition while the back of the truck is raised.
- Watch for rear bounce after bumps
- Check eye-style mounts for play
- Replace rear shocks as a pair
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7194 |
| UPC | 67486601569 |
| Shock series | Performance Shock |
| Position | Rear |
| Shock body | 2.38 inch diameter, twin tube |
| Type | Hydraulic |
| Reservoir | No |
| Collapsed length | 27.83 in. |
| Extended length | 16.3 in. |
| Travel length | 11.53 in. |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Insert | Closed cell foam |
| Valving | High flow 9 stage |
| Finish | White powdercoat with blue Fabtech logo |
| Lift setting | 7 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list names two trucks: 2004–2006 Chevrolet Silverado 1500 (LS, LT) and 2004–2006 GMC Sierra 1500 (SL, SLE, SLT). Trims are listed by model year, so check your exact trim against the list.
Later Silverado and Sierra 1500 model years, earlier years, and the 2500 and 3500 lines are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both mount codes are EB1, so the lower and upper ends are the same style. A 7 inch lift setting is specified, so check the shock lengths above against your suspension height before fitting the rear unit.
What’s included
The package is one rear shock absorber; the finish is white powdercoat.
Not included: the package names no brackets, bushings or bolts for this rear unit, so check what the mounts require first.









